Operators Manual

1. DUPLEX COPYING (Cont.)
2-Sided Originals > 2-Sided Copies
1
2
3
4
5
6
7
8
9
10
11
Placing two sided originals on the reversing automatic document feeder (optional) and pressing the
key feeds the original and scans the first side of the original into memory.
The original and the sheet are then turned over automatically and the second side of the original is
scanned into memory. Once both sides of all originals are scanned, the desired copies are printed.
You can set up to 100 Letter size originals at a time.
Note
This copying mode requires the reversing automatic document feeder (optional) and the automatic
duplexing unit (optional) to be installed.
1
Press the key on the control panel while in the READY 1
initial screen for copying. The “EDIT MENU” screen DUPLEX :1 > 1
DUAL TYPE :OFF
appears.
IMAGE SHIFT :OFF
2
Confirm that “DUPLEX” is highlighted on the screen.
Then press the key.
3
Select “2 > 2” by pressing the key.
DUPLEX 1
Original > Copy
Then press the key. Press the key to return
1 > 2
to the initial screen for copying.
2 > 2
4
Select the desired paper cassette, reproduction ratio,
image density and copy quantity.
• The automatic paper selection mode is selected as the
default mode.
5
Place the originals on the feed tray.
6
Press the key.
12
4-8 EDIT MENU