Setup > Wizard - D-Link

Section 3 - Configuration
In this section, you can configure the DDNS setting
for your camera. DDNS will allow all users to access
your camera using a domain name instead of an IP
address.
Setup > DDNS
DDNS:
Enable:
Server Address:
Host Name:
User Name:
Password:
(Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it
has been modified. The username and password are required when using the DDNS service.
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect to the DDNS.
Enter your password used to connect to the DDNS server.
D-Link DCS-910/920 User Manual
30