Multi-Region DVD Codes - Fantastic Products 4U

3. Display will show "disc loading" then "updating
flash memory"; FL display will show "writing"
4. After 1minute loader will open.
5. Remove disc and power off. DO NOT CLOSE TRAY
6. Power on and close loader
7. Now press and hold Play (>), Forward skip (>>I) and
Open/Close for more than 3 seconds
until "INITIALIZED" appears on front display.
Denver DVD-122
Press 'Open' on the remote control
Press 33080 on the remote
Press PLAY on the remote
The DVD door will close.
Denver DVD-311
Power on the unit and open the DVD CD Tray
Press the following on the Remote Control 3, 3, 0, 8, 8
You will see in the top left of the screen "****" appear
Key in a number corresponding to the Region you desire your player to be set to,
i.e. 1 for Region 1, 2 for Region 2 and so on, use 0 for Region free
Denver DVD-121
Press Open
Press 3 then 3 then 0 then 8 then 8 then 0
Press Play
Diamond 101
Open tray
Press 9999 on remote
Press OK
Press 9 = all regions, 4 = R4, 3 = R3, and so on, whichever Region you desire.
Diamond DVD-201D
Open tray
Press 2918
Press ENTER (a manual will appear on the screen)
Use up and down buttons to choose the region code
Press ENTER (13 and ENTER for multi region)
Press Set-up.
Www.fantasticproducts4u.co.uk