Navigate the Catalog HYDRAFORCE
Navigate the Catalog HYDRAFORCE
Navigate the Catalog HYDRAFORCE
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
COILS AND ELECTRONIC CONTROLS<br />
Series E Environmental Coils<br />
10-SIZE SERIES E COILS (Also for use on 12-Size Poppet Valves and 16-Size Poppet Valves)<br />
1.62<br />
41.1<br />
Dual Coil for SV10-47 Valves<br />
1.65<br />
41.9<br />
Dual Coil for SV10-47 Valves<br />
1.84<br />
DIA.<br />
46.7<br />
1.84<br />
DIA.<br />
46.7<br />
1.96<br />
49.9<br />
1.96<br />
49.9<br />
3.98<br />
101.1<br />
3.98<br />
101.1<br />
INCH<br />
MILLIMETRE<br />
INCH<br />
MILLIMETRE<br />
EY<br />
IP69K Rated Coil<br />
Thermal Shock Dunk Test Rated Coil<br />
Metri-Pack ® 150 Connector<br />
(Mating Connector: Delphi Packard No. 12052641)<br />
ER<br />
IP69K Rated Coil<br />
Thermal Shock Dunk Test Rated Coil<br />
Deutsch DT04-2P Connector<br />
(Mating Connector: Deutsch No. DT06-2S)<br />
EY Coil<br />
Part No.<br />
4300212<br />
4300224<br />
ER Coil<br />
Part No.<br />
4300412<br />
4300424<br />
Operating<br />
Voltage<br />
12 VDC<br />
24 VDC<br />
Resistance<br />
at 20°C<br />
5.9 ohms<br />
24.0 ohms<br />
Initial<br />
Current Draw<br />
2.0 amps<br />
1.0 amps<br />
Power<br />
24 watts<br />
24 watts<br />
Coil<br />
Weight<br />
408 g. (14.4 oz.)<br />
408 g. (14.4 oz.)<br />
Please note: Electrical specifications for Series E coils differ from those for standard HydraForce coils.<br />
(Refer to page 3.200.1 for standard coil specifications.)<br />
% OF RATED VOLTAGE<br />
120<br />
110<br />
100<br />
90<br />
80<br />
70<br />
60<br />
50<br />
CONTINUOUS DUTY OPERATING RANGE<br />
Minimum Voltage at <strong>the</strong> Coil Required for Pull-In<br />
32 cSt/150 ssu oil at 40°C<br />
Operating Range<br />
-40 -30 -20 -10 0 10 20 30 40 50<br />
AMBIENT TEMPERATURE (°C)<br />
60 70<br />
Retrofit Ordering Notes for 10-Size Coils<br />
Series E 10-size coils will fit all 10-size HydraForce valves as well<br />
as SV38-xx, SV58-xx, TS38-xx, TS10-xx, TS12-xx models. They<br />
can also be used with all of <strong>the</strong> following 12 and 16 size poppet<br />
valves: SV12-20, SV12-21, SV12-22, SV12-23, SV16-20, SV16-21,<br />
SV16-22, and SV16-23. Series E coils cannot be used with PV,<br />
ZL or EHPR series valves.<br />
Series E 10-size coils are slightly larger in diameter than<br />
standard HydraForce 10-size coils (0.11" larger), <strong>the</strong>refore <strong>the</strong>y may<br />
not be suitable for retrofit applications or existing manifold designs<br />
where coil clearance is tight. For all retrofit applications, <strong>the</strong> coil nut<br />
(top nut) must be ordered separately. For retrofit applications on<br />
SV10-47 dual coil valves, a spacer is also required and must be<br />
ordered separately. Refer to page 3.400.6 for all retrofit applications.<br />
3.400.3