Navigate the Catalog HYDRAFORCE

More documents

Recommendations

Info

COILS AND ELECTRONIC CONTROLS Proportional Valve Controller—DIN Coil Mount— GENERAL SPECIFICATIONS Plug Housing: Polyamide Plug Lid: Polycarbonate Weight: 30 g (1.06 oz.) without cable Connections: Mounted cable with unterminated wires provided; Length: approximately 2 meters (79") Note: The standard version of this controller is not UL Listed, but with the substitution of an alternate cable, it could be UL Listed. Consult factory. DESCRIPTION 10K Pot or 0–5 VDC Input—Economy Version A convenient, plug-mounted control amplifier for controlling HydraForce proportional valves that have solenoids with DIN 43650A/ISO 4400 electrical connectors. OPERATION This control module utilizes high frequency switching (PWM) to supply a proportional valve solenoid with a proportional control signal. The input signal to this controller can be from a 10K potentiometer or a 0–5 VDC source. This economy version has no ramp adjustments. Dither frequency and amplitude are factory pre-set. FEATURES • Mounts directly to solenoid coils with DIN 43650A connectors. • IP65 weather resistant when used with base gasket (supplied). • Adjustments accessible with a removable cover. • One unit covers supply voltages from 9 to 32 VDC. • No internal fuses; circuit limits current electronically. • Short circuit proof and reverse polarity protected. • Connector can be disconnected from coil when powered. • Maximum current adjustment does not affect minimum current setting. • Internal supply for potentiometer. RATINGS Supply Voltage: 9–32 VDC Coil rating must be matched with supply voltage: RCOIL ≤ (VSUPPLY – 1.5 V) / I-Max. Control Input Signal Options: 10K external potentiometer (accepts 5K to 50K pots), or 0–5 VDC current signal (see connection diagrams) Input Resistance: 200K Ohms Output Current: up to 2000 mA (see ordering info.) Minimum Current Range: 0–500 mA (adjustable) Maximum Current Range: 600–2000 mA (adjustable) Internal Supply for Setpoint Potentiometer: +5VDC Dither Frequency: 200 Hz (±10% of full scale) Preset at Factory Dither Amplitude: 5% Preset at Factory Operating Conditions: –20° to 85°C; 0 to 85% relative humidity Environmental Protection: IP65 with cover and base gasket installed SCHEMATIC V PS + (9-32 VDC) – POWER GND ACTIVE REVERSE POLARITY PROTECTION POTENTIOMETER INPUT +5 V REFERENCE VOLTAGE IN (0-5 VDC) SIGNAL GND VOLTAGE REFERENCE GENERATOR DITHER GENERATOR R D LOW DROP OUT (LDO) VOLTAGE REGULATOR I-MIN. R M ERROR R IN R AMPLIFIER MIN. + – I-MAX. R MAX. +5V VOLTAGE TO HIGH FREQUENCY PWM CONVERTER CURRENT SENSING AND SHORT CIRCUIT PROTECTION S 1 SOLENOID OUTPUT S 2 3.513.1
10K Pot or 0–5 VDC Input—Economy Version DIMENSIONS ® HYDRAFORCE (+) Power Supply Red (–) Power Supply Black Potentiometer Power White 0–5 VDC Input Green Input Ground Brown ADJUSTMENTS DETAIL APPROX. 79 2 M 3.36 85 Adjustments Under Cover. See Detail. 1.34 34 Minimum Current 1.50 38 Maximum Current INCH MILLIMETRE M3 1.34 34 .22 5.5 CONNECTIONS For Complete Set-Up Instructions, see page 3.560.1 10K Potentiometer (Pot.) Control Supplied by User Wire Color (+) Power Red (–) Power Black (+) Pot. White 10K Pot. Green (–) Pot. Brown 0 to 5 VDC Control Supplied by User (+) Power (–) Power Not Used (+) 0–5V (–) 0–5V Wire Color Red Black White Green Brown TO ORDER Part Number Output I-Min. Setting I-Max. Setting Cable Length 4000172 2000 mA 0 to 500 mA 600 to 2000 mA 2 meters 3.513.2
Page 1 and 2: FRONT PAGE OF CATALOG Navigate the
Page 3 and 4: COMMON WINDING SPECIFICATIONS ® HY
Page 5 and 6: SERIES 08, 80, 88, 98 COIL INFORMAT
Page 7 and 8: SERIES 10, 12, 16, 38, 58 COIL INFO
Page 9 and 10: ® HYDRAFORCE Proportional Valve Co
Page 11 and 12: ® HYDRAFORCE Standard Coil Weather
Page 13 and 14: ® HYDRAFORCE Series E Environmenta
Page 15 and 16: ® HYDRAFORCE Series E Environmenta
Page 17 and 18: SERIES E COIL NUTS & SPACERS When o
Page 19 and 20: ® HYDRAFORCE Intro. to Electro-Hyd
Page 21 and 22: ® HYDRAFORCE 0-5 VDC, 10K Pot or 0
Page 23 and 24: ® HYDRAFORCE 0-10 VDC Input DIMENS
Page 25: ® HYDRAFORCE 4-20 mA Input DIMENSI
Page 29 and 30: ® HYDRAFORCE Soft Shift—12 or 24
Page 35 and 36: ® HYDRAFORCE 4-20 mA Input DIMENSI
Page 37 and 38: ® HYDRAFORCE PWM (Pulse Train) Inp
Page 43 and 44: ® HYDRAFORCE 4-20 mA Input DIMENSI
Page 45 and 46: ® HYDRAFORCE PWM (Pulse Train) Inp
Page 47 and 48: Dual Solenoid Multifunction Valve D
Page 55 and 56: Proportional Valve Controllers—Gl
Page 57 and 58: ® HYDRAFORCE ELECTRONIC CONTROL OF
Page 59: ® HYDRAFORCE Deadband/I-Min. Spool

Navigate the Catalog HYDRAFORCE

Create successful ePaper yourself

Delete template?

Save as template?