Navigate the Catalog HYDRAFORCE

More documents

Recommendations

Info

COILS AND ELECTRONIC CONTROLS Series E Environmental Coils 10-SIZE SERIES E COILS (Also for use on 12-Size Poppet Valves and 16-Size Poppet Valves) 1.62 41.1 Dual Coil for SV10-47 Valves 1.65 41.9 Dual Coil for SV10-47 Valves 1.84 DIA. 46.7 1.84 DIA. 46.7 1.96 49.9 1.96 49.9 3.98 101.1 3.98 101.1 INCH MILLIMETRE INCH MILLIMETRE EY IP69K Rated Coil Thermal Shock Dunk Test Rated Coil Metri-Pack ® 150 Connector (Mating Connector: Delphi Packard No. 12052641) ER IP69K Rated Coil Thermal Shock Dunk Test Rated Coil Deutsch DT04-2P Connector (Mating Connector: Deutsch No. DT06-2S) EY Coil Part No. 4300212 4300224 ER Coil Part No. 4300412 4300424 Operating Voltage 12 VDC 24 VDC Resistance at 20°C 5.9 ohms 24.0 ohms Initial Current Draw 2.0 amps 1.0 amps Power 24 watts 24 watts Coil Weight 408 g. (14.4 oz.) 408 g. (14.4 oz.) Please note: Electrical specifications for Series E coils differ from those for standard HydraForce coils. (Refer to page 3.200.1 for standard coil specifications.) % OF RATED VOLTAGE 120 110 100 90 80 70 60 50 CONTINUOUS DUTY OPERATING RANGE Minimum Voltage at the Coil Required for Pull-In 32 cSt/150 ssu oil at 40°C Operating Range -40 -30 -20 -10 0 10 20 30 40 50 AMBIENT TEMPERATURE (°C) 60 70 Retrofit Ordering Notes for 10-Size Coils Series E 10-size coils will fit all 10-size HydraForce valves as well as SV38-xx, SV58-xx, TS38-xx, TS10-xx, TS12-xx models. They can also be used with all of the following 12 and 16 size poppet valves: SV12-20, SV12-21, SV12-22, SV12-23, SV16-20, SV16-21, SV16-22, and SV16-23. Series E coils cannot be used with PV, ZL or EHPR series valves. Series E 10-size coils are slightly larger in diameter than standard HydraForce 10-size coils (0.11" larger), therefore they may not be suitable for retrofit applications or existing manifold designs where coil clearance is tight. For all retrofit applications, the coil nut (top nut) must be ordered separately. For retrofit applications on SV10-47 dual coil valves, a spacer is also required and must be ordered separately. Refer to page 3.400.6 for all retrofit applications. 3.400.3
® HYDRAFORCE Series E Environmental Coils 12-SIZE SERIES E COILS (For 12 Size Spool Valves Only) 1.77 44.9 1.81 46.0 2.19 55.6 INCH MILLIMETRE 2.19 55.6 3.03 76.8 3.03 76.8 EY IP69K Rated Coil Thermal Shock Dunk Test Rated Coil Metri-Pack ® 150 Connector (Mating Connector: Delphi Packard No. 12052641) EG IP65 Rated Coil DIN 43650 Connector EY Coil Part No. EG Coil Part No. Operating Voltage Resistance at 20°C Initial Current Draw Power Coil Weight 6964012 6956012 12 VDC 4.3 ohms 2.8 amps 33.6 watts 1 kg. (2.2 lbs.) 6964024 6956024 24 VDC 17.5 ohms 1.4 amps 33.6 watts 1 kg. (2.2 lbs.) 6964036 6956036 36 VDC 34.8 ohms 1.0 amps 36.0 watts 1 kg. (2.2 lbs.) 6964048 6956048 48 VDC 67.0 ohms 0.7 amps 33.6 watts 1 kg. (2.2 lbs.) % OF RATED VOLTAGE 120 110 100 90 80 70 60 50 CONTINUOUS DUTY OPERATING RANGE Minimum Voltage at the Coil Required for Pull-In 32 cSt/150 ssu oil at 40°C Operating Range -40 -30 -20 -10 0 10 20 30 40 50 AMBIENT TEMPERATURE (°C) 60 70 Retrofit Ordering Notes for 12-Size Coils Series E 12-size coils are designed for use on 12-size spool valves only. These models are: SV12-24, SV12-25, SV12-3x, and SV12-4x. Series E 12-size coils cannot be used with the following 12 and 16 size poppet valves: SV12-20, SV12-21, SV12-22, SV12-23, SV16-20, SV16-21, SV16-22, and SV16-23. These valves use the Series E 10-size coils. Series E coils cannot be used with PV, ZL or EHPR series valves. 3.400.4
Page 1 and 2: FRONT PAGE OF CATALOG Navigate the
Page 3 and 4: COMMON WINDING SPECIFICATIONS ® HY
Page 5 and 6: SERIES 08, 80, 88, 98 COIL INFORMAT
Page 7 and 8: SERIES 10, 12, 16, 38, 58 COIL INFO
Page 9 and 10: ® HYDRAFORCE Proportional Valve Co
Page 11 and 12: ® HYDRAFORCE Standard Coil Weather
Page 13: ® HYDRAFORCE Series E Environmenta
Page 17 and 18: SERIES E COIL NUTS & SPACERS When o
Page 19 and 20: ® HYDRAFORCE Intro. to Electro-Hyd
Page 21 and 22: ® HYDRAFORCE 0-5 VDC, 10K Pot or 0
Page 23 and 24: ® HYDRAFORCE 0-10 VDC Input DIMENS
Page 25 and 26: ® HYDRAFORCE 4-20 mA Input DIMENSI
Page 27 and 28: 10K Pot or 0-5 VDC Input—Economy
Page 29 and 30: ® HYDRAFORCE Soft Shift—12 or 24
Page 37 and 38: ® HYDRAFORCE PWM (Pulse Train) Inp
Page 45 and 46: ® HYDRAFORCE PWM (Pulse Train) Inp
Page 47 and 48: Dual Solenoid Multifunction Valve D
Page 55 and 56: Proportional Valve Controllers—Gl
Page 57 and 58: ® HYDRAFORCE ELECTRONIC CONTROL OF
Page 59: ® HYDRAFORCE Deadband/I-Min. Spool

Navigate the Catalog HYDRAFORCE

Create successful ePaper yourself

Delete template?

Save as template?