Red Giant Grain Stir-Ator - David Manufacturing Co.
Red Giant Grain Stir-Ator - David Manufacturing Co.
Red Giant Grain Stir-Ator - David Manufacturing Co.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STEP 21<br />
Installation of gearbox drive belts -<br />
FOUR AUGER UNIT: Using two set of<br />
AX-38 V-belts, install one matched set<br />
on each end of top drive assembly.<br />
Check to be sure belt alignment is<br />
proper. Also, be sure clutch idlers are<br />
positioned as shown in Photos 16 and<br />
17.<br />
Installation of gearbox drive belts - SIX<br />
AUGER UNIT: First, follow the<br />
instructions given for the four-auger unit.<br />
Then, proceed to bolt bearing bracket<br />
and clutch idler on to the top of the sixauger<br />
trolley. See Photo 18 and<br />
Drawing F on page 46. Next, bolt sixauger<br />
extension drive shaft into<br />
place, using two carriage bolts,<br />
5/16" x 3/4", with lock-washers and nuts.<br />
DO NOT TIGHTEN THE 5/16" x 3/4"<br />
CARRIAGE BOLTS AT THIS TIME. BE<br />
SURE BEARING IS BOLTED IN<br />
POSITION AS SHOWN IN Photo 19.<br />
Photo 17<br />
Photo 18<br />
Photo 19<br />
22 PNEG-1358 <strong>Red</strong> <strong>Giant</strong> <strong>Stir</strong>-<strong>Ator</strong>