Altivar 31 - Square D
Altivar 31 - Square D
Altivar 31 - Square D
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Altivar</strong> ® <strong>31</strong> Adjustable Speed AC Drives<br />
Functions<br />
563717<br />
563718<br />
38<br />
Adjusting the preset speeds in PowerSuite software<br />
Adjusting the +/- Speed function in PowerSuite software<br />
Example of wiring:<br />
LI1: forward<br />
LIx: reverse<br />
LIy: +speed (USP)<br />
LIz: -speed (DSP)<br />
ATV<strong>31</strong> Control Terminals<br />
LI1 LIx LIy LIz +24<br />
a c b d<br />
© 2004–2005 Schneider Electric All Rights Reserved<br />
8800CT0401_Single Action Button<br />
Preset speeds<br />
This function permits the switching of preset speed references. Choose<br />
between two, four, eight, or sixteen preset speeds, enabled via one, two,<br />
three, or four logic inputs respectively. Preset speeds are adjustable in<br />
increments of 0.1 Hz, from 0 Hz to 500 Hz.<br />
Preset speeds are suited to material handling and to machines with several<br />
operating speeds.<br />
563539<br />
Forward<br />
or<br />
Reverse<br />
LSP<br />
20<br />
15<br />
10<br />
1<br />
LI2 0<br />
1<br />
LI3 0<br />
1<br />
LI4 0<br />
f (Hz)<br />
Example of operation with four preset speeds and two logic inputs<br />
+/- Speed<br />
This function increases or decreases a speed reference using single action<br />
buttons or double action buttons (such as on a pendant station).<br />
Single action buttons<br />
Single action buttons require two logic inputs and two directions of rotation.<br />
The input assigned to the +speed command increases the speed; the input<br />
assigned to the -speed command decreases the speed. The maximum<br />
speed is set by HSP.<br />
Direction -Speed Speed maintained +Speed<br />
Forward a and d a a and b<br />
Reverse c and d c c and b<br />
Motor frequency<br />
LSP<br />
0<br />
LSP<br />
Forward<br />
0<br />
Reverse<br />
0<br />
b b<br />
d<br />
a a a a a a a a<br />
t<br />
t<br />
t<br />
t<br />
b<br />
c c<br />
The speed obtained with<br />
inputs LI3 and LI4 at state 0 is<br />
LSP or the speed reference,<br />
depending on the level of<br />
analog inputs AI1, AI2, and<br />
AI3.<br />
Factory settings:<br />
1st speed: LSP (low speed or<br />
speed reference)<br />
2nd speed: 10 Hz<br />
3rd speed: 15 Hz<br />
4th speed: 20 Hz (high speed)<br />
8800CT0401_Plus Speed_Minus Speed_2.eps<br />
4/2005