Altivar 31 - Square D
Altivar 31 - Square D
Altivar 31 - Square D
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Altivar</strong> ® <strong>31</strong> Adjustable Speed AC Drives<br />
Field Installed Kits<br />
conduit kit.tif<br />
ATV18 kit.tif<br />
DynBrake.tif<br />
VW3A<strong>31</strong>101<br />
4<br />
Conduit entrance kit<br />
ATV28 replacement kit<br />
Dynamic braking resistor<br />
Remote keypad display<br />
Options and accessories<br />
© 2004–2005 Schneider Electric All Rights Reserved<br />
The following options and accessories are available for the ATV<strong>31</strong> drive controller:<br />
Braking resistors<br />
EMC (RFI) input filters1 DIN rail mounting plates<br />
UL Type 1 conduit entrance kit<br />
Adapter plate for replacing an <strong>Altivar</strong> 28 (ATV28) drive controller<br />
User interface and communication options<br />
FIELD INSTALLED KITS<br />
Conduit entrance kits<br />
This conduit box, allowing three or more conduit entries, attaches to the bottom of the drive controller.<br />
With the addition of this kit and without removal of the protective vent cover on the top of the drive, the<br />
degree of protection is UL Type 1.<br />
ATV28 replacement kits<br />
These brackets adapt the spacing of the ATV<strong>31</strong> mounting holes to match the ATV28 drive controller,<br />
which allows the ATV<strong>31</strong> drive to use the panel holes and mounting hardware already in place for the<br />
ATV28 controller.<br />
EMC (RFI) input filter<br />
The EMC input filter allows the drive to comply with European (CE) conducted emissions standard<br />
EN55022 Class B. An EN55011 Class A filter is built into the ATV<strong>31</strong> drive controller (ATV<strong>31</strong> N4,<br />
ATV<strong>31</strong> M2 only).<br />
DIN rail kit<br />
This kit allows DIN rail mounting of ATV<strong>31</strong> drive controllers, frame sizes 1–6.<br />
Dynamic braking resistor kits<br />
Dynamic braking resistors packaged in UL Type 1 enclosures are available for high-inertia applications<br />
requiring rapid deceleration times. The kits mount separately.<br />
Remote keypad display mounting kit<br />
This kit is used to mount a keypad display remotely, such as on the door of a wall-mounted or floorstanding<br />
enclosure. The remote keypad display offers the same features as the drive local keypad<br />
display, with the addition of (a) run, stop/reset, and forward/reverse buttons; and (b) an access locking<br />
switch. Up to four complete configurations can be stored in the remote keypad display and transferred<br />
to other drives of the same rating. The kit has an IP65 rating and includes a remote-mount keypad<br />
display, hardware, and a 3 m (10 ft) cable for saving and downloading configuration files.<br />
1. EMC = electromagnetic compatibility; RFI = radio frequency interference.<br />
4/2005
Change language