Technisches Manual EMP 900
Technisches Manual EMP 900
Technisches Manual EMP 900
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical <strong>Manual</strong> <strong>EMP</strong> 8x0.00/04/13/14 v6<br />
wh Münzprüfer Berlin GmbH, Germany<br />
Fig. 12 programming of channel bank switching<br />
MODE 3 2 banks<br />
bank 1: programming of channels assignment to bank 1<br />
bank 2: all channels which are not assigned to bank 1<br />
For this mode please choose under “configuration“ – „general setting“ –<br />
„variants“ „non“ at channel switching. Activation of bank switching after<br />
MODE 3 is carried out by assigning at least one coin channel to bank 1.<br />
This is set under “configuration” – “blocking” in menu “external”. The<br />
assignment is effected by a “click” within the column “Bank 1” in the<br />
respective coin row.<br />
Fig. 13 Assignment of coin channels to coin bank for MODE 3<br />
Fig. 13 shows the assignment of coins to channel bank 1. The example<br />
above shows the assignment of coin channel 8 to 14 and 16 to bank 1<br />
and all other channels to bank 2.<br />
Switching between banks is carried out via the reject line of the <strong>EMP</strong><br />
connector. If the reject line is open, bank 1 is active, if set to LOW bank<br />
2 is active.<br />
The reject function of the coin selector is deactivated when in bank<br />
switching MODE 3. The reject may be pressed however no reject signal<br />
will be send via the parallel interface.<br />
version 1.40<br />
page 24/53 subject to technical modification <strong>EMP</strong>8x0.00/04/13/14 v6