Technisches Manual EMP 900

Technical Manual EMP 8x0.00/04/13/14 v6
wh Münzprüfer Berlin GmbH, Germany
5.1. Technical Data EMP 8x0.14 v6
coin acceptance
coin blocking
interfaces
supply voltage
supply current stand by
during coin acceptance
32 coin channels, 16 master and 16 slave channels
Complete blocking via the machine controller. In addition,
any individual coin, or group of coins can also be blocked
through DIP switches. Individual coin blocking can also be
carried out via the serial interface.
USB, ccTalk
with USB Port: 5 volts DC
with power supply: 8 to 16 volts DC
with USB port: approx. 70 mA
with power supply: < 30 mA
with USB port: approx. 510 mA for 40 ms and 350 mA for
approx. 150 ms
with power supply: approx. 320 mA for 40 ms and 185 mA
for approx. 150 ms
temperature range +10°C to +70 °C
humidity classification according to DIN 40040: F
coin sizes
max. diameter x max. thickness: 32.5 x3.4 mm
dimensions
height x width x depth: 104 x 53 x 93.5 mm (without front
plate)
Options
/E extended temperature and humidity range
–20°C to +70°C, humidity classification E/D:
/F large coin funnel
/P no coin reject signal
/T teach mode (2 coin channels activated)
/X control for external sorting flaps
/Z additional external strimming detection
An additional power supply is mandatory if the coin selector
shall be operated in connection with a sorter, as the required
current for the external sorting flaps cannot be made
available from the USB port of the PC.
version 1.40
page 48/53 subject to technical modification EMP8x0.00/04/13/14 v6