TIMBER Pro - Dlubal Software

2 Input Data
Design Combination
It is possible to assign different limit values for the deflection to the individual load cases,
groups and combinations. First, select the relevant action in table Selected for Design. To
assign the selected design situation, click the blue checkmark button []. The following criteria
are available for EN 1995-1-1:
• w inst for a permanent action (SC)
• w fin for a leading variable action (S1)
• w fin - w c for a leading variable action with camber (S2)
The limit values of the deformations are specified in the standards or NAs and can be adjusted
for the different design situations in the corresponding parameter settings (see Figure
2.5, page 13).
The reference lengths that are decisive for the serviceability limit state design are managed
in table 1.8 (see chapter 2.8, page 27).
Comment
In this input field, you can enter user-defined notes describing for example the action combinations
of the current design case.
Program TIMBER Pro © 2011 Ing. Software Dlubal
11