TIMBER Pro - Dlubal Software

2 Input Data
2.6 Effective Lengths - Sets of Members
Table 1.6 manages the effective lengths of sets of members. It is displayed only when you
have selected at least one set of members for the design in table 1.1 General Data.
Figure 2.18 Table 1.6 Effective Lengths - Sets of Members
The structure of this table is similar to the previous table 1.5. Enter the effective lengths for
local as well as for lateral-torsional buckling about the two principal axes of the set of
members as described above. They determine the boundary conditions of the set of members
that is treated at large as equivalent member.
The detail settings also specify the cross-sections that are contained in the set of members.
Program TIMBER Pro © 2011 Ing. Software Dlubal
25