TIMBER Pro - Dlubal Software

4 Results
4. Results
Table 2.1 Design by Load Case is displayed immediately after the calculation. The upper part
of the results table shows you a summary of designs for the individual load cases, groups
and combinations. The lower part contains detailed information about the cross-section
characteristics, analyzed internal forces and performed designs for the load case that is selected
above.
The designs are shown in the results tables 2.1 to 2.5, sorted by different criteria. The subsequent
tables 3.1 and 3.2 display the governing internal forces. Table 3.3 informs you
about the member slendernesses. The two final results tables 4.1 and 4.2 contain the parts
lists referring to members and sets of members.
Each results table can be selected directly in the TIMBER Pro navigator. You can also use the
two buttons shown on the left or the function keys [F2] and [F3] to select the previous or
subsequent table.
Click the [OK] button to save the results. The add-on module TIMBER Pro will be closed and
you will return to the RSTAB work window.
Chapter 4 Results describes the different results tables one after the other. Evaluating and
checking results is described in detail in chapter 5 Results Evaluation on page 45.
4.1 Design by Load Case
Figure 4.1: Table 2.1 Design by Load Case
Description
This column displays for information the descriptions of the load cases, groups and combinations
that are decisive for the respective designs.
36
Program TIMBER Pro © 2011 Ing. Software Dlubal