Administering Platform LSF - SAS

External Load Indices and ELIM
Begin ResourceMap
RESOURCENAME
LOCATION
myrsc
[hostA]
End ResourceMap
6 Reconfigure LSF with the commands:
❖ lsadmin reconfig
❖ badmin mbdrestart
7 Display the resource with the command lsload -l. You should be able
to see the new resource and value:
HOST_NAME status r15s r1m r15m ut pg io ls it tmp swp mem myrsc
hostA ok 0.4 0.4 0.4 0% 0.0 0 22 0 24M 26M 6M 2
Additional
examples
Debugging an ELIM
Example code for an ELIM is included in the LSF_MISC/examples directory.
The elim.c file is an ELIM written in C. You can modify this example to collect
the load indices you want.
Set the parameter LSF_ELIM_DEBUG=y in the Parameters section of
lsf.cluster.cluster_name to log all load information received by LIM
from the ELIM in the LIM log file.
Set the parameter LSF_ELIM_BLOCKTIME=seconds in the Parameters section
of lsf.cluster.cluster_name to configure how long LIM waits before
restarting the ELIM.
Use the parameter LSF_ELIM_RESTARTS=integer in the Parameters section
of lsf.cluster.cluster_name to limit the number of times an ELIM can
be restarted.
See the Platform LSF Reference for more details on these parameters.
162
Administering Platform LSF