Administering Platform LSF - SAS

Chapter 4
Working with Hosts
% lim -t
Host Type
: SOL732
Host Architecture : SUNWUltra2_200_sparcv9
Matched Type
: SOL732
Matched Architecture : SUNWUltra2_300_sparc
Matched Model
: Ultra2
CPU Factor : 20.2
Viewing job exit rate and load for hosts
Use bhosts to display the exception threshold for job exit rate and the current
load value for hosts. For example, EXIT_RATE for hostA is configured as 4 jobs
per minute. hostA does not currently exceed this rate:
% bhosts -l hostA
HOST hostA
STATUS CPUF JL/U MAX NJOBS RUN SSUSP USUSP RSV
DISPATCH_WINDOW
ok 18.60 - 1 0 0 0 0 0 -
CURRENT LOAD USED FOR SCHEDULING:
r15s r1m r15m ut pg io ls it tmp swp mem
Total 0.0 0.0 0.0 0% 0.0 0 1 2 646M 648M 115M
Reserved 0.0 0.0 0.0 0% 0.0 0 0 0 0M 0M 0M
share_rsrc host_rsrc
Total 3.0 2.0
Reserved 0.0 0.0
LOAD THRESHOLD USED FOR SCHEDULING:
r15s r1m r15m ut pg io ls it tmp swp mem
loadSched - - - - - - - - - - -
loadStop - - - - - - - - - - -
THRESHOLD AND LOAD USED FOR EXCEPTIONS:
JOB_EXIT_RATE
Threshold 4.00
Load 0.00
Use bhosts -x to see hosts whose job exit rate has exceeded the threshold
for longer than JOB_EXIT_RATE_DURATION, and are still high. By default,
these hosts will be closed the next time LSF checks host exceptions and
invokes eadmin.
If no hosts exceed the job exit rate, bhosts -x displays:
There is no exceptional host found
Administering Platform LSF 73