DVS GSR Insert Owner's Manual - Travis Industries Dealer Services ...
DVS GSR Insert Owner's Manual - Travis Industries Dealer Services ...
DVS GSR Insert Owner's Manual - Travis Industries Dealer Services ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30 Operation<br />
Starting the Heater for the First Time<br />
<br />
<br />
<br />
Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will<br />
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This<br />
is normal. We recommend opening a window to vent the room.<br />
Condensation may appear on the glass each time you start the heater - this is normal.<br />
Blue Flames will occur on the heater when it first comes on. After fifteen minutes the flames will turn<br />
a more realistic yellow and orange color.<br />
Verify the power backup and control light batteries are installed (see page 39).<br />
Location of Controls<br />
Most features will be controlled by the included<br />
remote.<br />
°F<br />
Swing the access door and control cover<br />
down to access the controls on the insert.<br />
OFF<br />
HIGH<br />
CONTINUOUS<br />
PILOT<br />
ON REMOTE OFF<br />
PRG<br />
LOW<br />
ACCENT LIGHT<br />
GREEN SMART<br />
PILOT<br />
© <strong>Travis</strong> <strong>Industries</strong> 4090812 100-01232_001