TeSys protection components - Trinet

Characteristics
TeSys control relays
7
Model d control relays
Type CAD " CAD $ CAD
low consumption
Control circuit characteristics
Rated control circuit voltage (Uc) V 12…690 12…440 $ 5…72
Control voltage limits
Operation With coil 50/60 Hz 0.8…1.1 Uc at 50 Hz – –
type:
0.85…1.1 Uc at 60 Hz – –
standard, wide – 0.7…1.25 Uc 0.7…1.25 Uc
range
Drop-out 0.3…0.6 Uc 0.1…0.25 Uc 0.1…0.25 Uc
Average consumption at 20 °C " 50/60 Hz (to 50 Hz) VA Inrush: 70 – –
and at Uc
Hold-in: 8 – –
With standard coil W – Inrush or hold-in: 5.4 Inrush or hold-in: 2.4
Operating time
Between coil energisation and
(at rated control circuit voltage - opening of the N/C contacts ms 4…19 35…45 45…55
and at 20 °C)
- closing of the N/O contacts ms 12…22 50…55 60…70
Between coil de-energisation and
- opening of the N/O contacts ms 4…12 6…14 10…15
- closing of the N/C contacts ms 6…17 20 25
Short supply failures
Maximum duration without
affecting hold-in of the device ms 2 2 2
Maximum operating rate
In operating cycles
per second 3 3 3
Mechanical durability
In millions of operating cycles With coil 50/60 Hz (at 50 Hz) 30 – –
type:
standard $ – 30 30
wide range
Time constant L/R ms – 28 40
References :
pages 24525/3 to 24525/
5
Dimensions :
page 24537/2
Schemes :
page 24537/2
Schneider Electric
24526_Ver3.10-EN.fm/3