Controllers - AGCO Parts

Nozzle Body QC360 Viton
Features:
• Quick hand indexing with choice of
3, 4 or 5 outlets
• Allows for rapid change of spray tips
with the use for quick TeeJet caps
• Positive shut-off between each
spray position
• Body designed to fit into standard
cam-loc style quick couplers
• Locating Nib keeps body properly
oriented in cam-lock fitting
• Body assembly can be inserted in place of QCK and QCTF FloodJet
tips to allow for use of smaller capacity spray tips
• Allows for rapid change over from high volume fertilizer applications to
lower volume pesticide applications
• Made of corrosion resistant materials
• O-Rings made of Viton
• Maximum Operating Pressure 300 PSI
• Flow Rate 2.25 GPM with a 5 PSI pressure drop
• If Turret becomes difficult to turn remove e-clip slide turret off body and
lubricate o-rings and seal with a silicone based lubricant
| Part | Description |
| AG426499 | Nozzle Body QC-363-NYB-VI |
| AG426500 | Nozzle Body QC-364-NYB-VI |
| AG426501 | Nozzle Body QC-365-NYB-VI |
TeeJet 360 Nozzle Bodies with Fertilizer Outlet
TeeJets new QJ360F nozzle body
features a multiple 360° turret body
with an additional fertilizer outlet.
Flow rates are 2.25 GPM with 5 PSI
pressure drop through turret and 3.4
GPM with 5 PSI pressure drop
through fertilizer outlet.
Features:
• Quick hand indexing
• Hinged upper clamp and single
screw reduces assembly time
• Positive shut-off between each
spray position
• Maximum operating pressure 300
PSI
• Clamps on 1" pipe
| Part | Description |
| AG726298 | Nozzle Body Turret - 3 + 1 Fertilizer |
| AG726299 | Nozzle Body Turret - 4 + 1 Fertilizer |
| AG726300 | Nozzle Body Turret - 5 + 1 Fertilizer |
Triple Nozzles for Wet Booms
Quick TeeJet triple nozzles feature quick hand indexing
for a choice of three different spray tips or application
rates. A diaphragm check valve delivers drip-free
positive shut-off. They are made of corrosion-resistant
materials, nylon, celcon, and stainless steel. Both
models feature the quick-change nozzle cap system
which permits exact nozzle alignment and fast and easy tip replacement.
The maximum operating pressure is 150 PSI for the wet boom
style and 125 PSI on the dry boom model.
Notes: For correct nozzle alignment, check valve must be located parallel
with boom for both wet and dry type triple nozzles. Triple nozzle has
a maximum flow rate of 1.5 GPM with 5 PSI pressure drop.
| Part | Description |
| AG050868 | Triple Nozzle 1/2" |
| AG051344 | Triple Nozzle 3/4" |
| AG052250 | Triple Nozzle 1" (No Bolt Hole in Upper Clamp) |
Replacement Parts for Wet Booms
Note: *Optional items.
| Ref | Part | Description |
| 1 | AG052252 | Screw 1/2" and 3/4" |
| 1 | AG052251 | Screw 1" |
| 2 | AG052254 | Upper Clamp 3/4" |
| 2 | AG052253 | Upper Clamp 1" (No Bolt Hole) |
| 3 | AG050168 | O-Ring - Buna |
| 4 | AG052257 | Body 1/2" |
| 4 | AG052256 | Body 3/4" |
| 4 | AG052258 | Body 1" |
| 5 | AG051869 | Clip |
| 6 | AG001739 | Diaphragm, Teflon* |
| 7 | 6633638 | Diaphragm - EPDM |
| 7 | AG009057 | Diaphragm - Viton |
| 8 | AG006553 | Cap 10 PSI - Black |
| 9 | AG051873 | O-Ring EPDM (3 Required) |
| 10 | AG051871 | Indexing Button |
| 11 | AG051872 | Indexing Plate |
Nozzle Accessories
187