Controllers - AGCO Parts

Valve Flanges
| Part | Description |
| AG054470 | 1-1/2" Poly Flange |
| AG054469 | 2" Poly Flange |
| AG054456 | 3" Poly Flange |
| AG518365 | 1" Cast Iron Flange |
| AG554774 | 2" Cast Iron Flange |
| AG553026 | 3" Cast Iron Flange |
| AG553034 | 4" Cast Iron Flange |
| AG562963 | 5" Cast Iron Flange |
| AG561265 | 6" Cast Iron Flange |
| AG710539 | 2" 304 S.S. Flange |
| AG710540 | 3" 304 S.S. Flange |
| AG710541 | 4" 304 S.S. Flange |
| AG552046 | Flange Mounting Bolt |
| AG550477 | Nut |
| AG550450 | Lockwasher |
Model 12690 Throttling Valve
For regulating flow in systems equipped with centrifugal
pumps where sensitive regulation is required or to control
flow in agitation lines.
| Part | Description |
| AG001948 | Valve Throttling 3/4" Ports |
Throttling Valve
Valve is designed for use in the bypass line of the 144-
1-3 boom solenoid valve. When installed in the bypassto-tank
line, it may be adjusted to create a pressure drop
equal to the line pressure of that particular boom section.
Then when the operator turns the boom section on
or off, the pressure in the remaining boom section will
not be affected.
Flange Gaskets
Non-asbestos, DurLon ® .
| Part | Description |
| AG056121 | 1-1/2" Gasket |
| AG517098 | Flange Gasket 2" |
| AG517044 | Flange Gasket 3" |
| AG056123 | 4" Gasket |
| AG517045 | 5" Gasket |
| AG513870 | GASKET FULL FACE NON ASB |
TeeValve ® Control Valve
For selective control of three-section boom
sprayers at pressures up to 300 PSI:
• Use to open any of three-boom section lines in
any desired combination
• Raise lever to open, lower lever to close the valve without changing the
indexed position
• Aluminum construction with stainless steel and plastic internal parts for
maximum corrosion resistance
Note: Model No. 17Y: Inlet size - 1", Outlet size - 3/4", Bypass size - 3/4",
Gunlet size -3/4".
| Part | Description |
| AG006268 | TeeValve, 17Y |
| AG001549 | TeeValve Repair Kit |
| Part | Description |
| AG009925 | 1/2" Throttling Valve |
| AG051222 | 3/4" Throttling Valve |
Pressure Regulator
All nylon/stainless steel pressure regulator handles pressures
up to 150 PSI. Pressure adjustments are made
without tools. 3/4" or 1/2 ports with 1/4" (F) NPT gauge
opening.
| Part | Description |
| AG050436 | 1/2" Regulator |
| AG009860 | 3/4" Regulator |
Model 110 Relief Valves
The 110 piston-type regulating valves are available in
sizes 1/4", 3/8", 1", 1-1/4" or 1-1/2" in choice of ductile iron,
brass, or aluminum. Removable bonnet for servicing unit
without removing valve from line.
Valves
| Part | Description |
| AG053476 | 1/4" Brass (Up to 50 PSI) |
| AG843365 | 1/4" Brass (50 - 300 PSI) |
| AG052547 | 1/4" Brass (300 - 700 PSI) |
| AG001583 | 3/8" Brass (Up to 300 PSI) |
| AG001584 | 3/8" Brass (300 - 700 PSI) |
| AG051948 | 1" Aluminum (Up to 150 PSI) |
| AG006770 | 1" Ductile Iron (Up to 150 PSI) |
| AG055972 | 1-1/4" Brass (Up to 150 PSI) |
| AG051624 | 1-1/4" Aluminum (Up to 150 PSI) |
| AG050041 | 1-1/4" Ductile Iron (Up to 150 PSI) |
| AG059817 | 1-1/2" Aluminum (Up to 150 PSI) |
| AG513831 | 1-1/2" Ductile Iron (Up to 150 PSI) |
63