Controllers - AGCO Parts

Radar Speed Sensor Interface Cables
Notes: For Console with revision “E” or later. * is 1990 model year or later with factory-installed performance monitor.
| Part | Description |
| AG056073 | Raven Radar Ford Gen./Vers./New Holland |
| AG714280 | Raven Radar for John Deere |
| AG056072 | Raven Radar for Case-IH |
| AG714879 | Dickey-john Radar for Ford Gen./Vers./New Holland |
| AG711020 | Dickey-john Radar for John Deere* |
| AG711021 | Dickey-john or Magnavox Gun - John Deere - Rev D Console or Earlier ** |
| AG715258 | Dickey-john Radar for John Deere 7000/8000/9000 Series |
| AG710963 | Dickey-john Radar for Case-IH |
| AG711018 | Dickey-john Gun- Cat 65 & 75 - Rev E Console or Later ** |
| AG715886 | Dickey-john Gun- Cat 65 & 75 - Rev D Console or Earlier ** |
| AG713731 | Dickey-john Radar for Cat Challenger 65C/75C |
| AG712093 | Dickey-john Gun - Ford/White/Agco Allison -Rev E Console or Later ** |
| AG609180 | Interface Cable for Dickey-john Radar |
| AG710480 | Interface Cable for Dickey-john Radar (Console with Rev. “D” or earlier) |
| AG711016 | TRW Radar for Case-IH |
| AG056071 | Interface Cable/TRW Gun - Other - Rev E Consoles or Later |
Pressure Transducer for SCS 440 or SCS 450
Designed as an optional feature for the SCS 440 or SCS 450 consoles, Rev. B consoles or later with serial interface, approximately 2000 model
year or later. The addition of a pressure transducer will allow the operator to monitor spraying pressure.
Controllers
| Part | Description |
| AG428121 | Pressure Transducer |
| AG059593 | Pressure Transducer Console Cable 36" |
| AG059594 | Pressure Transducer Console Cable 120" |
| AG726306 | Pressure Transducer Cable Console End 30 Foot |
| AG726437 | Pressure Transducer Cable Sensor End 6 Foot |
| AG059595 | Pressure Transducer Sensor Cable 144" |
| AG726438 | Pressure Transducer Cable Sensor End 37 foot |
| AG726439 | Pressure Transducer Cable 44 foot Sensor End |
42