Controllers - AGCO Parts
Controllers - AGCO Parts
Controllers - AGCO Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Miscellaneous<br />
Fluid Film Rust Preventative<br />
Prevent rust and corrosion. Spray Fluid Film coating on any<br />
metal surface for protection against nature's elements.<br />
Note: 12 spray cans per case.<br />
| Part | Description |<br />
| AG001047 | Fluid Film - 11.75 oz Spray Can |<br />
| AG060002 | Fluid Film - 1 Gallon |<br />
Nylon Manifold<br />
Manifold is made of nylon and has a<br />
3/4" (F) inlet and eight 1/2" (F) outlets.<br />
A 1/4" gauge outlet is also standard.<br />
| Part | Description |<br />
| AG002151 | Manifold |<br />
Spray Control Calculator<br />
Slide rules are designed for use with<br />
spray equipment that has pump-toground<br />
speed coordination. Just enter<br />
your speed, desired application rate,<br />
nozzle size, and liquid density and the<br />
calculator will indicate the required<br />
pressure setting.<br />
| Part | Description |<br />
| AG514154 | For High Volume (US) |<br />
| AG521539 | For High Volume (Metric) |<br />
| AG521566 | For Low Volume (Metric) |<br />
| AG709158 | For Low Volume 1-70 GPA (US) |<br />
Electronic Wind/Temp/Humidity Meters<br />
The NK Kestrel Meters are very accurate,<br />
very tough and very affordable. You can<br />
carry them in your pocket, hold them in one<br />
hand and use them whenever you need to<br />
know wind speed, Temperature, or<br />
Humidity.<br />
They feature a large liquid filled crystal<br />
display which is easy to read under almost<br />
any condition and all three units provide<br />
wind speed, average wind speed, and<br />
maximum wind speed. The Kestrel 2000<br />
will provide Temperature in addition to wind<br />
speed and the Kestrel 3000 will provide<br />
Temperature and Humidity along with wind speed. To measure wind<br />
speed the Kestrel relies on a precision ultralight impeller mounted in<br />
jewel bearings. This impeller yields high accuracy of plus or minus 3%<br />
and low start up speed (0.3 M/S) It is shock mounted in a glass reinforced<br />
plastic housing which can simply be popped out and replaced<br />
with a new assembly in the event that the impeller mechanism becomes<br />
worn or damaged.<br />
The Kestrel units are waterproof and float. The hard case slips on and<br />
off easily and protects the display and all moving parts from damage.<br />
Performance is guaranteed for one full year!<br />
Features:<br />
• Minimum wind speed 0.7 MPH<br />
• Maximum wind speed 89 MPH<br />
• Operating Modes: Moving three second average wind speed, average<br />
since power on, or max three second gust since power turned on<br />
• Accuracy: +/-3% of reading or +/- least significant digit, whichever is<br />
greater<br />
• Units: Knots, meters per second, miles per hour, feet per minute,<br />
kilometers per hour<br />
• Buttons: Two sealed rubber buttons control all functions<br />
• Sealing: Water resistant to 3 feet; Unit floats<br />
• Shock: Drop tested to 6 feet<br />
• Temperature: Operating range 5°F - 122°F<br />
• Battery: User replaceable CR2032 coin cell; Typical life 400 Hours<br />
• Case: Slip-on hard case protects display, buttons, and impeller<br />
• Dimensions: 4.8 x 1.8 x 0.6"<br />
• Weight: 2.3 ounces with case<br />
| Part | Description |<br />
| AG726211 | Electronic Windmeter |<br />
| AG726212 | Electronic Windmeter and Temp meter |<br />
| AG726213 | Electronic Wind Temp and Humidity meter |<br />
| AG726214 | Replacement Impeller |<br />
Wind Meter<br />
For measuring wind velocity from 2 to 60 MPH, ± 10%<br />
accuracy.<br />
| Part | Description |<br />
| AG710260 | Wind Meter |<br />
208