Controllers - AGCO Parts

Delavan Turbo 90 Pump Repair Parts
Severe Service Coupler
Reduces the chances of vibration because it
clamps a full 360° on a pump shaft and tractor
PTO shaft. Made of durable steel. 15/16" pump
shaft and made for either 1-3/8" or 1-3/4" 1,000
RPM PTO.
| Part | Description |
| AG008723 | Coupler, 1-3/8", 1000 RPM |
| AG009202 | Coupler, 1-3/4", 1000 RPM |
Pump Oil
1 quart of Hypro Pump Oil.
Pumps
| Ref | Part | Description |
| 6 | AG002838 | Gasket |
| 7 | AG002826 | Seal Ring |
| 10 | AG006878 | Repair Kit, Includes Face Seals |
| | | for Abrasive Liquids |
| 11 | AG006428 | Seal Support |
| 13 | AG005331 | Impeller Assembly Nylon |
| 13 | AG006588 | Hub, Impeller |
| 13 | AG006587 | Impeller Only Less Hub |
| 15 | AG002835 | Snap Ring, Internal |
| 17 | AG000366 | Bearing - 2 required |
| 19 | AG002134 | Snap Ring, External |
| 21 | AG002135 | Shaft |
| 22 | AG006425 | Pipe Plug, Square Head |
Torque Bar and Chain
Anchors pump directly on PTO rather than with
solid base. Keeps the pump from turning with
the shaft.
| Part | Description |
| AG005266 | Torque Bar and Chain |
Quick Coupler for 1000 RPM
| Part | Description |
| AG002126 | Quick Coupler for 1-3/8" PTO |
| AG002839 | Quick Coupler for 1-3/4" PTO |
Dual Speed Coupler
Fits either 540 or 1000 RPM 1-3/8" PTO
shafts. Allows quick and simple slip-on, slipoff
installation of a pump to a tractor PTO
shaft. Just pull collar back and slide on or
slide off. The coupler is secured to the pump
shaft with allen head set screw. Made of
corrosion-resistant cast aluminum and the
collar is made of super tough nylon, colorcoded
International orange.
| Part | Description |
| AG009674 | Coupler, 5/8" |
| AG009676 | Coupler, 15/16" |
| Part | Description |
| AG057486 | Hypro Pump Oil - Quart |
Hypro D813 Diaphragm Pumps
Hypro high pressure diaphragm
pumps are recommended for spraying
of herbicides, pesticides, liquid fertilizers
and many other hard to handle
fluids. Low-cost maintenance and
almost wear-free operation make
these pumps ideal for a wide variety of
spraying jobs.
Pressure and output are designed for optimum performance of medium
to large-sized sprayers. Hypro high pressure diaphragm pumps are
supplied with single or double-splined through-shafts. Pumps include
pulsation dampeners.
Performance Information:
• Max. flow: 21.4 gpm/81 lpm
• Max. pressure: 725 PSI/50 bar
• Max. rated speed: 550 rpm (D813); 3600 rpm (D813GRGI)
• Max. fluid temperature: 140°F/60 °C
Other Attributes:
• Port sizes: 1-1/4" HB inlet, 3/4" (M)NPT outlet
• Shaft: Flanged adapter and 1-3 8"- 6 splined male shaft ext. (D813);
1" hollow shaft for gas-engine mount (D813GRGI)
• Pump shaft rotation: CW and CCW
• Housing: anodized aluminum
• Diaphragms: 3, semi-hydraulic
• Mounting base included
• Weight: 50 lbs./22.7 kg (D813); 66 lbs./30 kg (D813GRGI)
Note: High Pressure.
| Part | Description |
| AG058781 | 9910-D813 Pump |
| AG050854 | Control Unit |
| AG009460 | Gear Reduction Only |
| AG009038 | Gear Reduction Kit D50 |
74