Controllers - AGCO Parts

Banjo Cast Iron Pump Repair Parts
Notes: * = For 1-1/2" and 2" Pumps. ** = For 3" Pumps. 553441 is a 1/4"
Drain plug.
Type 316 Stainless Steel Pedestal Pumps
These pumps look and perform exactly like the rugged cast iron models
only all the wetted parts are made of type 316 stainless steel for maximum
corrosion resistance.
| Part | Description |
| AG053093 | 2" Pump with Pedestal |
| AG053091 | 3" Pump with Pedestal |
Type 316 Stainless Steel Pump Repair Parts
| Ref | Part | Description |
| 1 | AG006213 | Flange, Outlet 2"* |
| 1** | AG008574 | Flange, Outlet** |
| 2 | AG005793 | Flange, Inlet 20°, 2"* |
| 2** | AG008580 | Flange, Inlet** |
| 3 | AG006597 | Adapter, Gas Engine* |
| 3** | AG008570 | Adapter, Gas Engine** |
| 4 | AG007127 | Sleeve Drive, 5/8" * |
| 4** | AG005614 | Sleeve Drive, 3/4"* |
| 4 | AG007128 | Sleeve Drive, 7/8"* |
| 5 | AG005612 | Impeller* |
| 5** | AG008572 | Impeller** |
| 7 | AG007130 | Nut, Hex, 1/2-13 UNC* |
| 7** | AG050130 | Nut, Hex 1/2-13 UNC** |
| 8 | AG005613 | Wear Plate* |
| 8** | AG008576 | Wear Plate** |
| 9 | AG005904 | EPDM Gasket* |
| 9** | AG008579 | EPDM Gasket** |
| 10 | AG006228 | Gasket-Check Valve* |
| 10** | AG008581 | Gasket, Check Valve** |
| 11 | AG005611 | Gasket Adapter, 2" |
| 11** | AG008573 | Gasket Adapter, 3" |
| 12 | AG007123 | Cap Screw, 5/16"-18 x 3/4, 2" |
| 13** | AG050132 | Handle, 3" |
| 14 | AG007166 | Clamp, 5/8", 3/4" Shaft (old style)* |
| 14 | AG007121 | Clamp, 7/8" Shaft (old style) |
| 14 | AG058885 | Clamp, 5/8", 3/4" Shaft* (new style keyed) |
| 14** | AG058536 | Clamp** (new style keyed) |
| 15 | AG007120 | Wear Plate Gasket, 2" |
| 15** | AG008577 | Wear Plate Gasket, 3" |
| 16 | AG005795 | Pump Housing* |
| 16** | AG008575 | Pump Housing** |
| 17 | AG007119 | S.S. Acorn Nut 5/16-18, 2" |
| 19 | AG007117 | Flat Head 80°C Screw* |
| 19** | AG009384 | Flat Head 82°C Screw** |
| 21** | AG553441 | 1/4" |
| 22 | AG007115 | Hex Nut, 2" |
| 23 | AG007114 | Brg. Shaft Assembly/Shaft, 2"* |
| 23** | AG008563 | Shaft Assembly/Shaft 3"** |
| 24 | AG057557 | Pedestal Assembly for 1-1/2 & 2" - 3/4" Shaft |
| 24** | AG008567 | Pedestal Assembly for 3" - 1" Shaft |
| 25** | AG050136 | Cap Screw, 15/16-24-NF** |
| 26 | AG005610 | Seal Assembly, Viton* |
| 26** | AG008571 | Seal Assembly, Viton** |
| Ref | Part | Description |
| 1 | AG053115 | Outlet Flange, 2" |
| 2 | AG053114 | Inlet Flange, 2" |
| 2 | AG053100 | Inlet Flange, 3" |
| 5 | AG053111 | Impeller, 2" |
| 5 | AG053095 | Impeller Assembly, 3" |
| 8 | AG053110 | Wear Plate, 2" |
| 8 | AG053103 | Wear Plate, 3" |
| 9 | AG053107 | Gasket, 2" |
| 9 | AG053096 | Gasket, 3" |
| 10 | AG053106 | Check Valve, 2" |
| 10 | AG053097 | Check Valve, 3" |
| 11 | AG005611 | Gasket Adapter, 2" |
| 11 | AG008573 | Gasket Adapter, 3" |
| 12 | AG007123 | Cap Screw, 5/16"-18 x 3/4, 2" |
| 12 | AG050131 | Cap Screw, 3" |
| 13 | AG050132 | Handle, 3" |
| 14 | AG007166 | Clamp, 5/8", 3/4" Shaft (old style)* |
| 14 | AG007121 | Clamp, 7/8" Shaft (old style) |
| 14 | AG058885 | Clamp, 5/8", 3/4" Shaft* (new style keyed) |
| 14 | AG058536 | Clamp** (new style keyed) |
| 15 | AG007120 | Wear Plate Gasket, 2" |
| 15 | AG008577 | Wear Plate Gasket, 3" |
| 16 | AG053109 | Housing, 2" |
| 17 | AG007119 | S.S. Acorn Nut 5/16-18, 2" |
| 19 | AG053105 | Screw, 2" |
| 22 | AG007115 | Hex Nut, 2" |
| 22 | AG057557 | Pedestal Assm. for 1-1/2 & 2" - 3/4" Shaft |
| 24 | AG008567 | Pedestal Assm. for 3" - 1" Shaft |
| 26 | AG053108 | Seal, 2" |
| 26 | AG053099 | Seal, 3" |
Pumps
87