Controllers - AGCO Parts
Controllers - AGCO Parts
Controllers - AGCO Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pumps<br />
88<br />
Banjo 222 Series<br />
Banjo's 222 series cast iron pumps have<br />
more horsepower to deliver flows up to 225<br />
GPM. They are well suited for agricultural<br />
pumps, contractor pumps, and emergency<br />
uses (fires and floods). The 6.5 HP Intek Pro<br />
series motor features oil guard oil sensor,<br />
cast iron cylinder sleeve, high efficiency<br />
OHV design, and a super low-tone muffler.<br />
Pump Features:<br />
• Durable cast iron construction<br />
• Replaceable inlet and outlet flanges<br />
• Carbon ceramic seal with stainless steel cup and spring<br />
Note: Pump only requires 3/4" straight keyed shaft engine.<br />
| Part | Description |<br />
| AG725943 | Pump 2" Cast Iron with 6.5 HP Intek |<br />
| AG058539 | Pump 2" Cast Iron with 5.5 HP Honda |<br />
| AG726068 | Pump 2" Cast Iron with 5.5 HP Honda E/Start |<br />
| AG060206 | Pump 2" Cast Iron with 6.5 HP Honda |<br />
| AG726069 | Pump 2" Cast Iron with 6 HP Vanguard |<br />
| AG726062 | Pump Only 2" Cast Iron |<br />
Banjo 333 Series<br />
Banjo's 333 series pump will deliver flow<br />
rates up to 515 GPM.<br />
Pump Features:<br />
• Durable cast iron construction<br />
• Dynamically balanced impeller<br />
• Replaceable inlet and outlet flanges<br />
• Graphite loaded silicon carbide seal with<br />
stainless steel cup and spring<br />
| Part | Description |<br />
| AG426504 | Pump 3" with 13 HP Honda |<br />
Banjo 444 Series<br />
Banjo's 444 series self-priming 4" cast iron<br />
centrifugal pump will deliver up to 650 gallons<br />
per minute.<br />
Features:<br />
• Durable cast iron construction<br />
• Dynamically balanced impeller<br />
• Replaceable inlet and outlet flanges<br />
• V shaped for quicker priming<br />
• Graphite loaded silicon carbide seal with<br />
stainless steel cup<br />
| Part | Description |<br />
| AG725944 | Pump 4" with 18 HP Kohler |<br />
| AG426503 | Pump 4" with 24 HP Honda |<br />
Wet Seal Self-Priming Pumps<br />
Banjo wet seal pumps are equipped with<br />
a double seal arrangement where the<br />
seal is contained in an ethylene glycol<br />
(antifreeze) reservoir. This enables the<br />
pump to run dry for short time periods<br />
without damaging the seal.<br />
• Viton ® double seal in ethylene glycol reservoir<br />
• Sight tube indicator<br />
• Dynamic balanced impeller<br />
• All stainless steel hardware<br />
Note: See the Technical Pages for more information on repairs.<br />
| Part | Description |<br />
| AG055464 | 3" Cast Iron Pump, 11-HP Honda |<br />
| AG053730 | 2" Stainless Steel Pedestal Pump with 3/4" Shaft |<br />
Hypro Transfer Pumps<br />
Hypro self-priming centrifugal pumps handle big, high capacity, liquid<br />
transfer jobs with ease. The line of pumps offer flow rates from 150 gpm<br />
to 440 gpm to make short work of jobs such as filling nurse tanks, watering<br />
seedbeds, and transferring liquids. The durable and powerful line<br />
includes polypropylene, aluminum and cast iron models. Use them for<br />
transferring water, liquid fertilizers, and other chemicals compatible with<br />
pump materials. Polypropylene is a lightweight option that provides excellent<br />
resistance to corrosive chemicals. Aluminum is an economical choice<br />
for water transfer. Cast Iron is most suitable for rugged applications.<br />
Notes: PowerPro engines feature overhead valves (OHV) and low-oil<br />
sensor. 13 HP engine has electric start.<br />
| Part | Description |<br />
| AG428205 | Pump 3" Poly, 13 HP Electric Start - 440 GPM |<br />
| AG427031 | Pump 2" Poly, 3 Vane Impeller, 5.5HP, 150 GPM |<br />
| AG427196 | Pump 2" Poly, 5 Vane Impeller, 6.5HP, 200 GPM |<br />
| AG427197 | Pump 2" Cast, 6.5HP, 170 GPM |<br />
| AG427198 | Pump 3" Cast, 9HP, 330 GPM |<br />
| AG427199 | Pump 3" Cast, 13HP elec start, 330 GPM |<br />
| AG427200 | Pump 2" Aluminum, 5.5HP, 147 GPM |<br />
| AG427201 | Pump 3" Aluminum, 6.5HP, 259 GPM |<br />
| AG427202 | Trash Pump 3" Aluminum, 6.5HP, 272 GPM |<br />
Fill-Rite Series 400<br />
The Fill-Rite Series 400 diaphragm pump<br />
transfers all types of materials from clear,<br />
thin flowables to thick viscosity encapsulated<br />
products and suspensions in all<br />
types of weather. This pump is powered<br />
by a 12v DC 1/4-h.p. motor that draws just<br />
16 amps under normal operating conditions.<br />
Note: DO NOT use for fluids with low flash<br />
points.<br />
| Part | Description |<br />
| AG716619 | 12V Motor and Pump Only |<br />
| AG716618 | 12V Motor Only |<br />
Model 420 Pump Kit<br />
Includes pump and motor, 20' battery cable, bung adapter, nozzle boot,<br />
1" manual nozzle, 1" x 12' EPDM hose, and polypropylene suction pipe.<br />
35 lbs.<br />
| Part | Description |<br />
| AG053160 | Model 420 Pump Kit, DC |
Change language