Controllers - AGCO Parts
Controllers - AGCO Parts
Controllers - AGCO Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AutoBoom CAN PowerGlide Plus<br />
AutoBoom PowerGlide Plus uses state of the art hydraulics and gauging<br />
wheels to measure the distance to the ground. PowerGlide Plus systems<br />
are typically used in pre-emergent and early post-emergent applications.<br />
A Controller Kit consists of the console and cabling that controls the<br />
system from your cab. The Controller kit remains the same regardless<br />
of the machine you are using.<br />
An Installation Kit consists of the components on the exterior of your<br />
machine.<br />
A complete CAN PowerGlide Plus system will require the following four kits:<br />
1. CAN PowerGlide Plus controller kit (AG426993)<br />
2. Manufacturer and Model specific install kit<br />
3. Envizio PRO, Viper Pro, SCS4000, SCS4400, SCS4600, or<br />
SCS5000 system (will not need to order if any of these systems are<br />
already on the machine)<br />
4. Kit, CANBus, Terminators & Power Adapter “T” (AG727393 - not<br />
needed if any system in number 3 above are on the machine)<br />
Reference numbers above correspond to the possible kits needed for a<br />
complete system (listed below).<br />
To upgrade a PowerGlide Plus to and UltraGlide system order the below<br />
upgrade.<br />
Note: Visit www.Spray<strong>Parts</strong>.com for additional install kits.<br />
AutoBoom CAN UltraGlide<br />
AutoBoom UltraGlide uses state of the art ultrasonic sensors that gauge<br />
the distance to the ground. UltraGlide Systems are typically used in<br />
pre-emergent and post applications.<br />
A CAN UltraGlide Controller Kit consists of the console and cabling<br />
that controls the system from your cab. The Controller kit remains the<br />
same regardless of the machine you are using.<br />
An Installation Kit consists of the components on the exterior of your<br />
machine. The installation kit is manufacturer and model-specific, so different<br />
machines will use different kits.<br />
A complete CAN UltraGlide system will require the ordering of four kits:<br />
1. CAN UltraGlide Controller Kit.<br />
2. Manufacturer and Model Specific Hydraulic Install Kit.<br />
3. Envizio Plus, Envizio PRO, Viper Pro, Viper, SCS4000, SCS4400,<br />
SCS4600, or SCS5000 system (will not need to order if any of these<br />
systems are already on the machine).<br />
4. ISOBUS Kit (AG727393 Not needed if used with existing CANBus<br />
system).<br />
Note: Visit www.Spray<strong>Parts</strong>.com for all-makes install kits.<br />
| Ref | Part | Description |<br />
| 1 | AG426993 | Controller Kit - CAN PowerGlide Plus |<br />
| 1 | AG427871 | Controller Kit - ISOBUS PowerGlide Plus, <strong>AGCO</strong> |<br />
| | | Self-Propelled with Falcon VT |<br />
| 2 | AG427174 | Install Kit - RoGator 54 Series 1997 and Newer |<br />
| 2 | AG427177 | Install Kit - RoGator 54 Series Pre 1997 |<br />
| 2 | AG427178 | Install Kit - RoGator 64/74/86/SS Series |<br />
| 2 | AG427508 | Install Kit - RoGator 2009 and Newer |<br />
| 2 | AG427179 | Install Kit - TerraGator Liquid System |<br />
| 2 | AG426992 | Install Kit - Spra-Coupe 7X50 |<br />
| 2 | AG427509 | Install Kit - Spra-Coupe 7X60 |<br />
| 2 | AG427175 | Install Kit - Willmar 8100/8500 Series |<br />
| 2 | AG427176 | Install Kit - Willmar 6000-7000 Series |<br />
| 3 | AG427093 | Kit - CAN AutoBoom Console |<br />
| 4 | AG727393 | Kit - ISOBUS (Power Adapter Tee and Terminators) |<br />
| | AG427344 | Cable - 12 ft Extension |<br />
| Upgrade | AG427169 | PowerGlide Plus to UltraGlide Upgrade for |<br />
| | | RoGator (2004+) and SpraCoupe 7x50 |<br />
| Upgrade | AG427928 | PowerGlide Plus to UltraGlide Upgrade for |<br />
| | | RoGator (2003 & older) |<br />
| Ref | Part | Description |<br />
| 1 | AG426991 | Controller Kit - CAN UltraGlide for 100 ft + booms |<br />
| 1 | AG427962 | Controller Kit - CAN UltraGlide for 90 ft |<br />
| | | and smaller booms |<br />
| 1 | AG427963 | Controller Kit - CAN UltraGlide for |<br />
| | | 3-pt mounted booms |<br />
| 1 | AG427959 | Controller Kit - ISOBUS UltraGlide for <strong>AGCO</strong> |<br />
| | | Self-Propelled w/ Falcon VT |<br />
| 2 | AG427180 | Install Kit - RoGator 54 Series 1997 and Newer |<br />
| 2 | AG427183 | Install Kit - RoGator 54 Series Pre 1997/664 |<br />
| 2 | AG427184 | Install Kit - RoGator 64/74/86/SS Series |<br />
| 2 | AG427492 | Install Kit - RoGator 2009 & Newer |<br />
| 2 | AG427185 | Install Kit - TerraGator Liquid Systems |<br />
| 2 | AG426990 | Install Kit - SpraCoupe 7x50 |<br />
| 2 | AG427491 | Install Kit - SpraCoupe 7x60 |<br />
| 2 | AG427182 | Install Kit - Willmar 6000-7000 Series |<br />
| 2 | AG427181 | Install Kit - Willmar 8100/8500 |<br />
| 3 | AG427093 | Kit - CAN AutoBoom Console |<br />
| 4 | AG727393 | Kit - ISOBUS (Power Adapter Tee and Terminators) |<br />
| | AG427664 | Center Rack Control Kit - RoGator (Factory Install) |<br />
| | AG428013 | Center Rack Control Kit - Generic (Prior Rev B) |<br />
| | AG428014 | Center Rack Control Kit - Generic (After Rev B) |<br />
| | AG427170 | CAN Dual Ultrasonic Sensor Kit - RoGator |<br />
| | AG428015 | CAN Dual Ultrasonic Sensor Kit - |<br />
| | | RoGator w/ factory installed AutoBoom |<br />
| | AG426442 | Standard Gauge Wheels - RoGator (90-120 ft) |<br />
| | AG428024 | Standard Gauge Wheels - RoGator (60-80 ft) |<br />
| | 516990D1 | Right Ultrasonic Assembly (less bracket) |<br />
| | 516991D1 | Left Ultrasonic Assembly (less bracket) |<br />
| | AG427058 | Ultrasonic Sensor only |<br />
Precision Products<br />
31