Controllers - AGCO Parts

CAN SmarTrax TM 3D
NEW!
The CAN SmarTrax provides a more integrated
and seamless installation. The yaw
sensor has been integrated into the control
node and all programming and operation can
now be performed via the Viper Pro,
Envizio Pro (II), or Cruizer II. The 3D
upgrade provides compensation for roll, pitch
and yaw to improve performance in rough
and uneven terrain.
When combined with a Phoenix 300 receiver utilizing OmniStar HP correction,
2”-4” swath accuracy can be achieved up to 10 mph with 3D
activated. CAN SmarTrax kits consist of three or four components:
• CAN SmarTrax node kit
• Machine-specific hydraulic installation kit
• Viper Pro, Envizio Pro (II), or Cruizer II
• DGPS receiver (Not required with Envizio Pro (II) w/ GPS or
Cruizer II)
CAN SmarTrax 3D - Challenger Steer-Ready Kits
NEW!
| Part | Description |
| AG428378 | Install Kit with 3D - MT700, MT800 C-Series with |
| | Viper Pro/Envizio Pro (Requires 2 cables below) |
| AG428379 | VPro/EPro, Cable Power/CAN |
| AG428380 | VPro/EPro, Cable Cab |
| AG428378 | Install Kit with 3D - MT700, MT800 C-Series |
| | with Cruizer 2 (Requires console cable below) |
| AG428381 | Cable Console Cruizer 2 |
| AG428304 | Install Kit with 3D - MT700, MT800 C-Series with |
| | original Cruizer (Includes cable) |
| AG428305 | Install Kit w/out 3D - MT700, MT800 C-Series with |
| | original Cruizer (Includes cable) |
NEW!
CAN SmarTrax TM 3D
These node kits are for use with traditional style cable (round 10-pin
connector).
These kits will only work with hydraulic steer kits using this format: 117-
0295-xxx
All kits other than those for the original Cruizer will require an AG727393
CAN power tee and terminator kit if no CAN system is already present.
| Part | Description |
| AG427706 | Controller Kit, CAN SmarTrax w/ 3D for Viper |
| | Pro/Envizio Pro |
| AG427708 | Controller Kit, CAN SmarTrax w/ 3D for Cruizer |
| AG428364 | Controller Kit, CAN SmarTrax w/3D for Cruizer II |
| AG428363 | Controller Kit, CAN SmarTrax w/3D for WR Cruizer II |
| AG427765 | Install Kit, RoGator 854 (1996 and older)/664 |
| AG427766 | Install Kit, RoGator 854 (1997 model) |
| AG427767 | Install Kit, RoGator 854 (1998 and newer) |
| AG427771 | Install Kit, TerraGator 1903 |
| AG427830 | Install Kit, SpraCoupe 220 |
| AG427828 | Install Kit, SpraCoupe 3000/4000 |
| AG427772 | Install Kit, AGCO DT 160/180/200/225/240 |
| AG427773 | Install Kit, AGCO Allis 9635/9655/9675/9695 |
CAN SmarTrax TM 3D
These kits are for the new series of valves.
These kits will only work with hydraulic steer kits using this format:
117-4001-xxx
All kits other than those for the original Cruizer will require an
AG727393 CAN power tee and terminator kit if no CAN system is
already present.
| Part | Description |
| AG428306 | Controller Kit, CAN SmarTrax w/3D for Viper |
| | Pro/Envizio Pro |
| AG428308 | Controller Kit, CAN SmarTrax w/3D for Cruizer |
| AG428367 | Controller Kit, CAN SmarTrax w/3D for WR Cruizer II |
| AG428368 | Controller Kit, CAN SmarTrax w/3D for Cruizer II |
| AG428318 | Install Kit, RoGator 1254 |
| AG428322 | Install Kit, RoGator 64/74 Series (Excluding 664), |
| | SS (JIC Fittings) |
| AG428328 | Install Kit, RoGator 84/86/94/96 Series |
| | (Flat Face O-Ring Fittings) |
| AG428321 | Install Kit, TerraGator 1603/1803/1804 |
| AG428317 | Install Kit, TerraGator |
| | 6103/6203/8103/8104/8144/8203/8204/8244/9103/9203 |
| AG427711 | Install Kit, TerraGator 6203/82XX/83XX (2009 and newer) |
| AG428325 | Install Kit, SpraCoupe 7X5X, 7X60 |
NEW!
Precision Products
29