Controllers - AGCO Parts
Controllers - AGCO Parts
Controllers - AGCO Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Repair <strong>Parts</strong> Scot PressurSeal Pumps<br />
Ace GE-Series Pumps<br />
| Ref | Part | Description |<br />
| 1 | AG706421 | Seal, Viton |<br />
| 2 | AG703226 | Key Impeller - Square |<br />
| 3 | AG703235 | Key, Shaft (Woodruff) |<br />
| 4 | AG512540 | Bearing Pump Side |<br />
| 5 | AG514757 | Bearing - Pulley Side |<br />
| 6 | AG703227 | Flinger, Rubber |<br />
| 8 | AG703289 | Drain Plug |<br />
| 11 | AG703315 | Retainer Bearing |<br />
| 12 | AG706420 | Sleeve |<br />
| 13 | AG706425 | O-Ring, Seal Plate |<br />
| 15 | AG703287 | O-Ring Shaft - Viton |<br />
| 16 | AG704640 | Impeller Retainer Assembly |<br />
| 17 | AG704636 | Case 3" x 3"(F) NPT |<br />
| 17 | AG704610 | Casting Volute, 4" x 3" Hose End |<br />
| 18 | AG706423 | Impeller |<br />
| 19 | AG707010 | Plate Seal |<br />
| 20 | AG703282 | Pedestal Frame |<br />
| 22 | AG028320 | Shaft Straight |<br />
| 23 | AG706984 | Gauge 0-200 PSI |<br />
| 29 | AG708456 | Tube, Acrylic |<br />
| 30 | AG706858 | O-Ring |<br />
| 31 | AG707797 | Pressure Tube Assembly |<br />
Ace's GE-Series pump provides<br />
service where power<br />
sources are limited or unavailable<br />
including skid mount and<br />
ATV units. The pumps are<br />
ideally suited for liquid transfer or spray-transfer combinations. Pumps<br />
feature cast iron construction, easily replaceable mechanical seal, stainless<br />
steel sleeve to protect engine shaft, and slinger ring between pump<br />
seal and engine bearings to prevent liquid from entering engine. The<br />
pump and engine are fully assembled ready to install and run.<br />
GE-650/660:<br />
• 1-1/2" Suction x 1-1/4" Discharge<br />
• Max pressure: 120 PSI<br />
• Max flow: 110 GPM<br />
• 650 mounts to 5/8" UNF threaded engine shaft<br />
• 660 mounts to 3/4" keyed engine shaft<br />
GE-800/860:<br />
• 2" Suction x 1-1/2" Discharge<br />
• Max pressure: 140 PSI<br />
• Max flow: 140 GPM<br />
• 850 mounts to 1" UNF threaded engine shaft<br />
• 860 mounts to 1" keyed engine shaft<br />
| Part | Description |<br />
| AG057186 | GE-650 Pump with 5.5 HP Honda, threaded shaft |<br />
| AG055760 | GE-650 Pump less engine, threaded shaft |<br />
| AG427229 | GE-660 Pump less engine, keyed shaft |<br />
| AG726015 | GE-800 Pump with 8 HP Honda, threaded shaft |<br />
| AG427230 | GE-860 Pump less engine, keyed shaft |<br />
Banjo Engine Driven Poly Pumps<br />
The new improved design of this poly<br />
pump sets it apart from the competition.<br />
A new rear bracket design now<br />
features a weep hole so if seal failure<br />
occurs, it can easily be seen and<br />
repaired. Seal failure that goes undetected<br />
can often lead to premature<br />
engine failure.<br />
• New V-shaped body for faster priming<br />
• New high-performance, precision-molded impellers<br />
• New thumb screw drain and prime plugs<br />
• New heavy-duty motor shaft slinger<br />
| Part | Description |<br />
| AG000809 | 1-1/2" with 3HP Briggs and Stratton 100 GPM |<br />
| AG426805 | 2" with 6HP LCT Engine |<br />
| AG426806 | 2" with 6.5HP Intec Pro |<br />
| AG000940 | 2" with 3HP Briggs and Stratton 100 GPM |<br />
| AG426806 | 2" with 6.5HP Intec Pro |<br />
| AG008159 | 2" with 5HP Honda 160 GPM |<br />
| AG057723 | 2" with 5.5HP Elec. Start Honda 160 GPM |<br />
| AG060322 | 2" with 6HP Vanguard 160 GPM |<br />
| AG057192 | 3" with 6.5HP Honda 320 GPM |<br />
| AG060323 | 3" with 6HP Vanguard 320 GPM |<br />
| AG007488 | Pump Only 1-1/2" |<br />
| AG007487 | Pump Only 2" |<br />
| AG057190 | Pump Only 3" |<br />
| AG008333 | Engine 5.5 HP Honda 3/4" Keyed Shaft |<br />
| AG000671 | Engine Only - 5 HP Briggs and Stratton Keyed Shaft |<br />
Pumps<br />
85