MM850402-06 Gas Analysers 3000-4000 - om.gr

More documents

Recommendations

Info

Instruction Manual MM850402 ed. 06You need to follow the driver installation below only at first connection of the adaptor. Then, every time youconnect the adaptor to your USB port, it will be automatically identified and it will be ready to operate.• If you have previously installed a similar adaptor on your pc and the drivers that are about to install aredifferent from those already installed, please uninstall the already installed drivers FIRST. Please refer to theDriver’s Uninstall procedure of your Operating System.6.3.1.1 Installing driver for the RS232/USB adaptor• Close all the active windows and/or applications.• If you computer runs in WindowsXP or Windows XP SP1, temporally disconnect the PC from the web. Todo this, temporally remove the network cable from your pc, if connected, or by disabling your network cardgoing to the “Control Panel \ Network and Dial-Up Connections”, right-clicking on the appropriate connectionand selecting “Disable” from the menu. The connection can be re-enabled after the correct driver installation.This it’s not necessary if your computer runs Window XP SP2 if configured to ask before connecting toWindows Update. Windows XP SP2 can have this parameter already set, and to verify this open theControl Panel, select “System”, select the Hardware tab and click “Windows Update”. Please verify that thisoption is DISABLED.• Connect the adaptor to a USB port of your computer. This will automatically launch the “Windows Found NewHardware Wizard”, if the adaptor is not automatically identified and installed on your system.• The following page will be displayed:• Select “No, not this time” to avoid the driver search in internet, then click “Next” to proceed with the installation24
Instruction Manual MM850402 ed. 06• Select the second option: “Install from a list or a specific location (Advanced)”, then click “Next”• Select the option referring to the following page, flagging “Search for the best driver in these locations”. Press“Browse” to select the file path.• Select the folder where the driver is present on the CD:• D:\\EE26032-SW-DRIVER USB-Serial FTDI, then select the folder referred to your operative system and click“OK”. The driver will be automatically installed on your system.NOTE: IF WINDOWS XP IS CONFIGURED TO WARN WHEN UNSIGNED (NON-WHQL CERTIFIED) DRIVERS ARE ABOUT TO BEINSTALLED, YOUR COMPUTER WILL BE DISPLAY THE “HARDWARE INSTALLATION” WARNING PAGE. CLICK ON“CONTINUE ANYWAY” TO CONTINUE WITH THE INSTALLATION. IF WINDOWS XP IS CONFIGURED TO IGNORE FILESIGNATURE WARNINGS, NO MESSAGE WILL APPEAR.At the end Windows will show a message indicating that the installation was successful. Click “Finish” to completethe installation.25
Page 1 and 2: EcoLine 4000GreenLine 4000UniGas 30
Page 3 and 4: Instruction Manual MM850402 ed. 06T
Page 5 and 6: Instruction Manual MM850402 ed. 061
Page 11 and 12: Instruction Manual MM850402 ed. 06A
Page 19 and 20: Instruction Manual MM850402 ed. 06C
Page 23: Instruction Manual MM850402 ed. 06T
Page 29 and 30: Instruction Manual MM850402 ed. 06P
Page 35 and 36: Instruction Manual MM850402 ed. 06P
Page 39 and 40: Instruction Manual MM850402 ed. 06S
Page 41 and 42: Instruction Manual MM850402 ed. 06M
Page 46 and 47: Instruction Manual MM850402 ed. 06M
Page 48 and 49: Instruction Manual MM850402 ed. 06I
Page 56 and 57: Instruction Manual MM850402 ed. 06E
Page 66 and 67: Instruction Manual MM850402 ed. 06D
Page 68 and 69: Instruction Manual MM850402 ed. 06I

MM850402-06 Gas Analysers 3000-4000 - om.gr

Create successful ePaper yourself

Delete template?

Save as template?