MM850402-06 Gas Analysers 3000-4000 - om.gr

Instruction Manual MM850402 ed. 06SET-UP Pag.2PRINTER TESTCLOCK TESTTEST OUTPUTTEST KEYBOARDNEXT–• Use the [] and [] keys to move the cursor symbol to the desired option.• Press the [ENTER] key to enter in the option set-up page.• Switch the instrument off to exit from the configuration procedure10.3.1 ClockSelect this option for date and time set-up. Verify that the current values are correct because the analyzer use thisdata for analysis storing.CLOCKHour : 10Minutes : 22DATEESCAPE–• Use the [] and [] keys to move the cursor symbol to the desired option.• Press the [ENTER] key to enter in the option set-up page.• Press [ESCAPE] (F2) to return to the previous menu.• Press [DATE] (F1) to change date.DATEDay : 10Month : 22Year : 1999Type: EUROHOURESCAPE–• Use the [] and [] keys to move the cursor symbol to the desired option.• Press the [ENTER] key to set a new date or date format (European or USA).• Press [ESCAPE] (F2) to return to the previous menu.• Press [TIME] (F1) to change time.10.3.2 Serial PortSelecting this option, you can set the baud rate and the ID number for the instrument using an infrared serialcommunication.Serial PortAddress : 0Baud-rate : 9600ESCAPE–• Use the [] and [] keys to move the cursor symbol to the desired option.• Press the [ENTER] key to set a new ID number or baud rate.• Press [ESCAPE] (F2) to return to the previous menu.57