MM850402-06 Gas Analysers 3000-4000 - om.gr

Instruction Manual MM850402 ed. 067 OPERATIONS7.1 Basic OperationAll the procedures and programming operations on the 3000-4000 series, can be made using the keyboard andthe display.NOTE: ALL NUMERIC VALUES SHOWN IN THE FIGURES OF THIS MANUAL ARE INDICATIVE AND LISTED AS AN EXAMPLE.The analyzer should be used in environments where the temperature does not exceed the specified limits (from -5°C to +45°C) and where the relative humidity is lower than 95% non-condensing.7.1.1 KeyboardThe front panel keys functions are the following:[F1] and [F2] These keys are multifunctional. The instrumentchange the assigned function during theoperations. All displayed pages have, in thebottom, 2 boxes each containing the assignedfunction (e.g. ANALYSIS ). If no word isdisplayed inside the box, no function is assignedto that function key.[], [], [] and [] They move the cursor symbol or to increase ordecrease numerical values.[ENTER] Accept and memory store the modifiedparameter or variable.[PRINT]Print the report of the analysis.[ON/OFF]Switch the analyzer on or off.[STORE]Read or store the analysis data to or in thememory.[SETUP]Go to the configuring page of the instrument.[MENU] Go to the auxiliary function (Ambientmeasurements, Flow and return Temperature,etc.) menu.[DRAFT]Go to the Pressure/ Draft measurement.[SMOKE] Allows the data input for smoke indexmeasurements. You need an external pump forthe gas sampling(Addional option/accessory).[HELP]Display the most important information for theservice: the battery charging level, the status ofthe gas sensors, the free memory, etc.27