MM850402-06 Gas Analysers 3000-4000 - om.gr

Instruction Manual MM850402 ed. 06MEMORYSTORETAG SELECTIONDELETE MEMORYRECALL MEMORY–ID TAGESCAPE• You can set 3 rows of personal data of the selected tag by pressing [ID TAG] (F1). In this case the followingpage will be displayed:ID TAGR1 Plant 1R2 Boiler 1R3 Customer 1ESCAPE–• Select the row you wan to modify and press [ENTER].• Type in your text or edit the current one.• At the end press [ESCAPE] to return.8.3 Delete MemoryIf you had pressed the [ENTER] key with the cursor on the “DELETE MEMORY” option, the analyser will displaythe following message:!! ATTENTION !! The memory will be deleted when you press [DELETE]If you press the [DELETE] key (F1), The analysis data will be deleted.8.4 Recall MemoryIf you had pressed the [ENTER] key with the cursor on the “RECALL MEMORY” option, the analyser will displaythe following page:RECALL MEMORYTAG SELECTIONSELECT MEMORYMODEVIEW MEMESCAPE–NOTE:BEFORE RECALLING THE MEMORY YOU MUST SELECT THE TAG IF IT IS DIFFERENT FROM THE CURRENT ONEDIPLAYED SELECT THE READING MODE: SINGLE OR AVERAGE AND SELECT THE STORED DATA.Press [VIS.MEM] (F1) to visualize the analysis data: the selected memory data or the average values of theselected Tag. Press [PRINT] (F2) to print the report for the displayed data.To change the recalling mode follow the procedure below:• Use the [] and [] keys to move the cursor symbol to “MODE” option.• Press the [ENTER] key to select the option.• Use the [] and [] keys to move the cursor symbol to “Single” or “Average” mode.• Press the [ENTER] key to select the option.• Press [ESCAPE] (F1) to return to the previous menu without save the selection.To change the memory date follow the procedure below:46