Advanced Calibration Techniques for VNAs

More documents

Recommendations

Info

User Characterization: Embedding Fixture Data(Only Need to Do This Once)Step 1 Steps 2, 3 Step 4openshortloadthruPerform in-fixture calStep 1: Calibrate test system & fixture using any calibration method (SOLT, TRL, …)Step 2: Disconnect cables from fixture and connect them to ECal moduleStep 3: Perform user characterization of ECal module (fixture data is embedded)Step 4: Disconnect cables from ECal module and reconnect to fixtureAdvanced VNA Calibration© Agilent Technologies, Inc. 2006 Page M6- 80DUT
User Characterization: Applying Fixture Cal(Simple! Does Not Require In-Fixture Cal)Step 1 Steps 2, 3 Step 4Step 1: Disconnect cables from fixtureStep 2: Connect cables to ECal moduleDUTStep 3: Perform “User-Defined ECal Calibration” of test systemStep 4: Disconnect cables from ECal module and re-connect them to fixture with DUTStep 5: Start measuring! (Fixture data is de-embedded from the measurement)Advanced VNA Calibration© Agilent Technologies, Inc. 2006 Page M6- 81
Page 1 and 2:
Advanced Calibration Techniquesfor
Page 3 and 4:
Agenda• Overview of Calibration
Page 5 and 6:
The Need for CalibrationHow do we g
Page 7 and 8:
Systematic Measurement ErrorsRrecei
Page 9 and 10:
Performing the Calibration: TRL•
Page 11 and 12:
Unknown Thru CalibrationThe “Unkn
Page 13 and 14:
Compromises of Traditional Non-Inse
Page 15 and 16:
Unknown Thru AlgorithmUnknown thru
Page 17 and 18:
Two-Port Unknown Thru Calibration S
Page 19 and 20:
Unknown Thru Example Using Attenuat
Page 21 and 22:
dBCable Movement ErrorCable Movemen
Page 23 and 24:
Magnitude (dB)Comparing Unknown and
Page 25 and 26:
Measuring Devices with Non-Aligned
Page 27 and 28:
4-Port Unknown Thru with Different
Page 29 and 30: Unknown Thru for Different Waveguid
Page 31 and 32: Traditional Polynomial-Based Models
Page 33 and 34: Calibration Standard Modeling Proce
Page 35 and 36: Benefits of Data-Based Standards•
Page 37 and 38: Data-Based Standard FileCITIFILE A.
Page 39 and 40: Advantage of Measuring More Than 3
Page 41 and 42: Factors That Contribute to Weightin
Page 43 and 44: F lush S hor t d BF lush S hor t P
Page 45 and 46: A irline S hor t d BD eviation f ro
Page 47 and 48: Offset Load Calibration Advantages
Page 49 and 50: DirectMeasurementModelingError Corr
Page 51 and 52: Automatic Port Extensions - Step 1
Page 53 and 54: Measurement ResultsDelay and loss c
Page 55 and 56: Which Standards Should I Use?• Fo
Page 57 and 58: Narrowband APE ExampleAPE with shor
Page 59 and 60: Summary of Automatic Port Extension
Page 61 and 62: Order of Fixturing Operations• Fi
Page 63 and 64: Differential Port MatchingAdvanced
Page 65 and 66: Two-Port De-Embedding.s2p file1 2Fi
Page 67 and 68: Two Versus Four Port Embedding /De-
Page 69 and 70: How Do I Get My Probe De-Embedding
Page 71 and 72: Measuring Probes Using Adapter-Remo
Page 73 and 74: Measuring Probes Using Unknown Thru
Page 75 and 76: What is Electronic Calibration?•
Page 77 and 78: Agilent’s “ECal” Line of Elec
Page 79: User Characterization: Using Adapte
Page 83 and 84: Summary (continued)• Two-tier TRL
Page 85 and 86: Additional Resources• Application
show all

Advanced Calibration Techniques for VNAs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?