10 table saw - Grizzly Industrial Inc.

GroundingExtension CordsIn the event of an electrical short, grounding provideselectric current a path of least resistance toreduce the risk of electrical shock. This tool isequipped with an electric cord having an equipment-groundingconductor which must be properlyconnected to a grounding plug. The plug mustbe plugged into a matching outlet that is properlyinstalled and grounded in accordance with alllocal codes and ordinances.Improper connections of the electrical-groundingconductor can result in risk of electric shock. Theconductor with green or green and yellow stripedinsulation is the electrical-grounding conductor. Ifrepair or replacement of the electric cord or plugis necessary, do not connect the equipmentgrounding conductor to a live terminal.We do not recommend the use of extension cordswith 220V equipment. It is much better to arrangethe placement of your equipment and the installedwiring to eliminate the need for extension cords.Should it be necessary to use an extension, makesure the cord is rated Hard Service (grade S) orbetter. Refer to the chart in Section 1: SafetyInstructions to determine the minimum gauge forthe extension cord when using either 110V or220V. The extension cord must also contain aground wire and plug pin. Always repair or replaceextension cords when they become worn or damaged.This equipment must begrounded. Verify that anyexisting electrical outletand circuit you intend toplug into is actuallygrounded. Under no circumstancesshould thegrounding pin from anythree-pronged plug beremoved. Serious injurymay occur.We have covered some basic electricalrequirements for the safe operation of yourmachine. These requirements are not necessarilycomprehensive. You must be surethat your particular electrical configurationcomplies with local and state codes.Ensure compliance by checking with yourlocal municipality or a licensed electrician.-10- G1022 Series Contractor Saws