10 table saw - Grizzly Industrial Inc.

SECTION 8: CLOSUREThe following pages contain general machinedata, parts diagrams/lists, a troubleshooting guideand Warranty/Return information for your ModelG1022 Series.If you need parts or help in assembling yourmachine, or if you need operational information,we encourage you to call our Service Department.Our trained service technicians will be glad to helpyou.If you have comments dealing specifically withthis manual, please write to our Bellingham,Washington location using the address in Section3 Introduction.We have included some important safety measuresthat are essential to this machine’s operation.While most safety measures are generallyuniversal, each workshop is different and safetyrules should be considered as they apply to yourspecific situation.Operating this equipment creates the potentialfor flying debris to cause eye injury.Always wear safety glasses or goggleswhen operating equipment. Everyday glassesor reading glasses only have impactresistant lenses, they are not safety glasses.Be certain the safety glasses you wear meetthe appropriate standards of the AmericanNational Standards Institute (ANSI).We recommend you keep a copy of our currentcatalog for complete information regarding warrantyand return policy. If you need additionaltechnical information relating to this machine, or ifyou need general assistance or replacementparts, please contact the Service Department listedin Section 3 Introduction.Additional information sources are necessary torealize the full potential of this machine. Tradejournals, woodworking magazines, and your locallibrary are good places to start.The Model G1022 Series was specificallydesigned for wood cutting operations. DONOT MODIFY AND/OR USE THIS MACHINEFOR ANY OTHER PURPOSE. Modificationsor improper use of this tool will void thewarranty. If you are confused about anyaspect of this machine, DO NOT use it untilall your questions have been answered orserious personal injury may occur.Like all power tools, there is danger associatedwith the Model G1022 Series.Accidents are frequently caused by lack offamiliarity or failure to pay attention. Usethis tool with respect and caution tolessen the possibility of operator injury. Ifnormal safety precautions are overlookedor ignored, serious personal injury mayoccur.G1022 Series Contractor Saws -45-