C11T- MULTIFUNCTION CNC BOARD Rev. 2 - CNC4PC

More documents

Recommendations

Info

C11T (Rev.2.1) User ManualThe “Internal Enable” is the result of an AND operation among the “E-Stop Pin”, the SCHPoperation mode selected by the user and the port connection to the PC parallel Port.4.3 Inputs simplified block diagramFig. 3 Simplified functional block diagram for the inputs.Revision: 9/23/2010 http://cnc4pc.com/TechDocs/C11TR2_1_User_Manual.pdf 6/24
C11T (Rev.2.1) User Manual5. Special Functions5.1 Safety Charge Pump “SCHP”. (Pin 17)This board takes advantage of Mach ability to send a specific frequency throughone of the pins of the parallel port when the program is in control of the system.CNC machinery can be very dangerous, and you could have a risk of the machinedoing something different that what you intend the machine to do if the programloses control of your system. Mach be can be programmed in a way, so when it is“in control”, it delivers a 12.5 KHz signal through one of the pins. This card lets youuse this signal to work as an On/Off switch for your system, enabling a powerfulsafety system for your equipment. If you ever had windows crash on you, then thiscard is for you. The port can also do weird things while the system is coming up, ordown.For Configuring the Charge Pump in Mach X: Use the dialog Config / Portsand pins / Output Signals. Enable the Charge Pump output and configures it as isshown in the Fig. 8 Next, press the apply button.Fig. 3. Charge Pump configurationRevision: 9/23/2010 http://cnc4pc.com/TechDocs/C11TR2_1_User_Manual.pdf 7/24
Page 1 and 2: C11T (Rev.2.1) User ManualC11T- MUL
Page 3 and 4: C11T (Rev.2.1) User ManualGeckodriv
Page 5: C11T (Rev.2.1) User Manual4. Functi
Page 9 and 10: C32 (Rev. 1.1) User Manual5.2 Varia
Page 11 and 12: C32 (Rev. 1.1) User ManualFig. 5. S
Page 13 and 14: C32 (Rev. 1.1) User Manual Enables
Page 15 and 16: C11T (Rev. 2.1) User ManualWhen the
Page 17 and 18: C11T (Rev. 2.1) User ManualFig. 11
Page 19 and 20: C11T (Rev. 2.1) User ManualFig. 16
Page 21 and 22: C11T (Rev. 2.1) User ManualPOSSIBLE
Page 23: C11T (Rev. 2.1) User Manual8. Dimen

C11T- MULTIFUNCTION CNC BOARD Rev. 2 - CNC4PC

Create successful ePaper yourself

Delete template?

Save as template?