150/250 Wheel Balancer - aesco

More documents

Recommendations

Info

SETTING WHEEL DATA150/250 Wheel BalancerSetting with the Automatic Gauge‣ Testing is achieved by moving the internal gauge (Figure 7) and external gauge (Figure 8)against the rim. Wait for the confirmation “beep”.‣ The figures to set (distance, width, and diameter) are entered automatically.‣ It is a single, quick, error-free operation.NOTE: If the automatic gauges malfunction (and for the “aluminum” and “light alloy” programs)manual programming is possible (see following section).Figure 7Figure 8Kwik-Way Products Inc. 13. 800-553-5953500 57 th Street, Marion, IA 52302 USACopyright 2005 All Rights ReservedEquipment specifications, options and accessories subject to change without notice.
150/250 Wheel BalancerSETTING WHEEL DATA (continued)Manual Setting of Wheel DataOn the front panel use the +/- buttons to set the figures for width (Figure 6 (6), diameter (Figure6 (5) and distance (Figure 6 (4), for the wheel being balanced.‣ The rim width figures are generally given on the rim itself, otherwise it can be measuredusing the gauge supplied with the machine. Figure 9‣ The rim diameter is generally given on the rim itself, or can be read from the tire.‣ The rim distance is measured on the internal side of the rim with the cursor gauge fitted onthe machine (Figure 10). The distance to be set can be read from the scale.NOTE: For wheels of small dimensions (for example motorcycle wheels) only the staticimbalance has to be established. In these cases the STATIC balancing program is used and thecorrect figures only have to be set for the rim diameter Figure 6 (5). The rim distance and widthcan be set to any figures.Figure 9Figure 10Entering Measurements in mmThe default unit of measurement for rim width and diameter is inches. In order to set wheelmeasurements in mm press the MM/INCH button and enter the figures in mm as they appear onthe wheel. The LED lights up to indicate that the figures are set to mm. Distance is always set inmm (LED on).NOTE: For PAX programs the default unit of measurement of rim width and diameter is mm.Kwik-Way Products Inc. 14. 800-553-5953500 57 th Street, Marion, IA 52302 USACopyright 2005 All Rights ReservedEquipment specifications, options and accessories subject to change without notice.
Page 8 and 9: 150/250 Wheel BalancerTECHNICAL CHA
Page 10: INSTALLATION150/250 Wheel BalancerC
Page 13 and 14: INSTRUCTIONS FOR USE150/250 Wheel B
Page 15: 150/250 Wheel BalancerSELECTING BAL
Page 19 and 20: 150/250 Wheel BalancerUSING ALUDATA
Page 21 and 22: SPLIT WEIGHT PROGRAM150/250 Wheel B
Page 23 and 24: 150/250 Wheel BalancerOPTIMIZING IM
Page 25 and 26: 150/250 Wheel BalancerBALANCER CONF
Page 27 and 28: DATA ARM CALIBRATION150/250 Wheel B
Page 29 and 30: AUTO-DIAGNOSIS150/250 Wheel Balance
Page 31 and 32: 150/250 Wheel BalancerTROUBLE SHOOT
Page 33 and 34: ROUTINE MAINTENANCE150/250 Wheel Ba
Page 35 and 36: 150/250 Wheel BalancerPART NUMBER R
Page 37 and 38: 150/250 Wheel BalancerPART NUMBER R
Page 40: Kwik-Way Products Inc.500 57 th St.

150/250 Wheel Balancer - aesco

Create successful ePaper yourself

Delete template?

Save as template?