150/250 Wheel Balancer - aesco

150/250 Wheel BalancerDATA ARM CALIBRATION (continued)Figure 16L-1 appears in the left display.‣ Move the external distance arm to the right position (Figure 16) and while holding it inposition, measure the distance from the stop surfaces on the contact points of the internaland external arms in mm. While still holding the armL-2 appears in the left display.‣ Move the external distance arm to the left position and while holding it in position, measurethe distance from the stop surfaces on the contact points of the internal and external arms inmm. While holding the arm in the aligned position, use the +/- key (Item 10) enter thatmeasurement and press OK (Item 11).Figure 17H-1 appears in the left display.‣ Mount a 14 inch tire and wheel, move the internal arm into position for measuring wheeldiameter, while holding in position. Using the +/- key (Item 10) enter the diameter of thewheel and press OK (Item 11). Figure 17C-2 appears on the left screen.Data arm calibration is complete and data is saved.Kwik-Way Products Inc. 25. 800-553-5953500 57 th Street, Marion, IA 52302 USACopyright 2005 All Rights ReservedEquipment specifications, options and accessories subject to change without notice.