150/250 Wheel Balancer - aesco

150/250 Wheel BalancerAUTO-DIAGNOSIS (continued)I/O Test:The display reads i_o; various inputs and outputs are rested:‣ Magnet Output: the left display reads mag; the right display reads on if the magnet isactive and oFF if the magnet is inactive.‣ Adapter Enable Output:: the left display reads fla; the right display reads on if theenable output is active and oFF if it is inactive.‣ Pedal Microswitch Input: the left display reads ped; the right display. Reads on ispushed up and oFF if the pedal is in the neutral position.‣ Wheel Guard Microswitch Input: the left display reads inP; the right display reads on ifthe guard is closed and oFF if the guard is open.Temporary Balancing of a Wheel:‣ The display reads rEL; relative balancing tests can be run on a wheel without actuallybalancing it using counterweights;‣ Mount the test wheel and launch a first cycle; on completion of the cycle the display showsthe real imbalance of the wheel and automatically records the imbalance data and annulsthe same for all subsequent measurements.NOTE: The imbalance figures displayed in all the subsequent measurements after activation ofthis function are not real and are relative to the initial imbalance of the test wheel.This function cannot be memorized and is cancelled when the machine is switched off or byreturning to the same function and pressing the decrease button - : the right display reads on ifthe function is active and oFF if it is inactive.WARNINGSThe present instructions booklet is an integral part of the product. Carefully study the warningsand instructions contained in it. This information is important for safe use and maintenance.Conserve this booklet carefully for further consultation.The Wheel Balancer SBM 150/250 is a machined designed and constructed for the balancing ofcar, van and motorcycle wheels. The machine has been designed to operate within the limitsdescribed in this booklet and in accordance with the manufacturer’s instructions.The machine must be used only for the purpose for which it was expressly designed. Any otheruse is considered wrong and therefore unacceptable. The maker cannot be held responsible foreventual damage caused by improper, erroneous, or unacceptable use.This symbol is used in the present manual to warn the operator of particular risks associatedwith the use of the machine.Kwik-Way Products Inc. 27. 800-553-5953500 57 th Street, Marion, IA 52302 USACopyright 2005 All Rights ReservedEquipment specifications, options and accessories subject to change without notice.