Operating Manual Hopper loader

More documents

Recommendations

Info

9 Maintenance and repairMaintenance and cleaning METRO 06-1 to 30-19.4.2 Check inlet flapFig. 9.4 – Check inlet flap[1] Check inlet flap Prepare the hopper <strong>loader</strong> for maintenance (see "Before starting work" on Page 32). Remove the screen filter (see "Clean screen filter" on Page 34). Check the inlet flap [1] for wear (see arrows in the magnified view).36 Edition: February 2006
METRO 06-1 to 30-1Maintenance and repair 9Maintenance and cleaning9.4.3 Checking demand probe (METRO M** only)Fig. 9.5 – Demand probe[1] Programming key[2] LED, yellow[3] LED, greenCheck/adjust demand probeNoteThe probe is locked at the factoryThe probe must be reset for specific material or after a position change.Setting demand probe Unlock: press and hold the programming key [1] for at least 10 s with a blunt object until the greenLED [3] goes out. Position the probe as desired and make sure that the probe is in contact with the glass. Run-empty adjustment: Press and hold the programming key [1] (1-5 sec) until the green LEDflashes. The green and yellow LED [2] now indicate ready for operation. Lock: press and hold the programming key for at least 10 s. The green LED flashes slowly at first,then faster after 5 s and then goes out.Conducting full adjustmentIn rare cases it is necessary to conduct a full adjustmentNote First unlock, then the run-empty adjustment Then with the hopper full press and hold the programming key for 5 to 10 s until the green LEDflashes twice as fast as in the first 5 s. Now the green LED lights. Then lock the probe again.Edition: February 2006 37
Page 1 and 2: Hopper loaderMETRO 06-1 to 30-1Oper
Page 4 and 5: METRO 06-1 to 30-1Transport and set
Page 6 and 7: METRO 06-1 to 30-1Structure and fun
Page 8 and 9: METRO 06-1 to 30-1Operation 7Settin
Page 10 and 11: METRO 06-1 to 30-1Operation 7Operat
Page 12 and 13: 8 TroubleshootingTroubleshooting ME
Page 14 and 15: 9 Maintenance and repairBefore star
Page 16 and 17: 9 Maintenance and repairMaintenance
Page 20 and 21: 9 Maintenance and repairRepair work
Page 26 and 27: METRO 06-1 to 30-1Decommissioning a
Page 28 and 29: 11 OptionOption: Pneumatically actu
Page 34 and 35: METRO 06-1 to 30-1Option 11Implosio
Page 36 and 37: METRO 06-1 to 30-1Option 11Implosio
Page 38 and 39: METRO 06-1 to 30-1Option 11Marathon
Page 40 and 41: METRO 06-1 to 30-1Appendix 12METRO
Page 50 and 51: METRO 06-1 to 30-1Appendix 12Multif
Page 52 and 53: METRO 06-1 to 30-1Appendix 12Pneuma
Page 54 and 55: ABCDE2A1+ZSWPE+ 24V M VACVPE 1 2 3G
Page 56: AB1CF 2DEnderung Datum Name1DatumBe

Operating Manual Hopper loader

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?