You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
METRO 06-1 to 30-1Operation 7Settings7 Operation7.1 SettingsAll settings required for the function of the hopper <strong>loader</strong> are made at the central Motan controller(see corresponding operating manual).7.2 Material feed7.2.1 GeneralThe objective is to establish an even flow of material (air conveying) during suction. The air supply atthe suction point is adjusted for an even conveyor air flow.NoteThe air supply at the suction point must be readjusted every time the material changesbecause of the different flow properties of the various types of granulate.7.3 Operation7.3.1 CommissioningThe system must be installed by Motan technicians and transferred to the customer when it is readyfor operation.7.3.2 Continuous operationRequirements: Material line correctly connected Correct setting of the air supply at the suction point Electrical system correctly connected All values input or adjusted as specified in the operating manual of the controllerEdition: February 2006 25
Change language