Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
METRO 06-1 to 30-1Transport and setup 4Connections4.2.2 Fastening material/vacuum hoseMATERIAL DAMAGE!CAUTION!Incorrectly attached material/vacuum hoses cause transport problems and damage tothe hopper <strong>loader</strong>. Lay out material/vacuum hose to the hopper <strong>loader</strong> with a sufficiently wide curve. Ground the hose.Fig. 4.4 – Flow direction[1] Flow direction with PU tubes Note the flow direction (PU tubes only, optional), (see figure 4.4). Incorrect installation directionmay influence the transport output.Fig. 4.5 – Ground material tube[1] Wire spiral Remove the wire spiral [1] from the tube and bend it inwards to make it contact the hopper <strong>loader</strong>. Slide the material/vacuum hose on to the connection on the hopper <strong>loader</strong> and fasten the hosewith a suitable hose band clip (see Figure 4.5).Edition: February 2006 19
Change language