Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9 Maintenance and repairRepair work METRO 06-1 to 30-19.5.4 Adjusting proximity switch (METRO H** only)21Fig. 9.9 – Adjusting proximity switch[1] Proximity switch[2] Hexagon nuts Prepare the hopper <strong>loader</strong> for maintenance (see "Before starting work" on Page 32). Close the discharge flap. Set the clearance as shown in the diagram 9.9. Lock the proximity switch [1] with the hexagon nuts [2].9.5.5 Adjusting discharge flap (METRO H** only)Fig. 9.10 – Positioning weight[1] Weight Slide the weight on to the tension pin and fix the weight.Installation position: see diagram 9.10. Tighten the set screw and lock it with Loctite 242.42 Edition: February 2006
Change language