You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9 Maintenance and repairRepair work METRO 06-1 to 30-19.5 Repair work9.5.1 Disassemble METRO 06-1 to 30-1 hopper <strong>loader</strong> into its modulesFig. 9.6 – METRO H** hopper <strong>loader</strong>s[A] METRO HC/HJ*[B] METRO HP*[1] Profile clamp[2] Ground terminal[3] Seal[4] Screw[5] Multifunction panel[6] Ground (glass units only)Separating modulesMaterial damage!Parts which fall into the unit may cause operational faults.CAUTION! Make sure that no parts fall into the unit. Cover the opening of the machine and bin. Prepare the hopper <strong>loader</strong> for maintenance (see "Before starting work" on Page 32). To separate the module, slacken the screw [4] and remove the profile clamp [1] (also the groundfor glass units [6]). Disengage the module. Remove the seal [3]. Remove the two ground terminals [2].38 Edition: February 2006
Change language