Operating Manual Hopper loader

More documents

Recommendations

Info

METRO 06-1 to 30-1Transport and setup 4Connections4.2.2 Fastening material/vacuum hoseMATERIAL DAMAGE!CAUTION!Incorrectly attached material/vacuum hoses cause transport problems and damage tothe hopper loader. Lay out material/vacuum hose to the hopper loader with a sufficiently wide curve. Ground the hose.Fig. 4.4 – Flow direction[1] Flow direction with PU tubes Note the flow direction (PU tubes only, optional), (see figure 4.4). Incorrect installation directionmay influence the transport output.Fig. 4.5 – Ground material tube[1] Wire spiral Remove the wire spiral [1] from the tube and bend it inwards to make it contact the hopper loader. Slide the material/vacuum hose on to the connection on the hopper loader and fasten the hosewith a suitable hose band clip (see Figure 4.5).Edition: February 2006 19
4 Transport and setupConnections METRO 06-1 to 30-14.2.3 Electrical connectionConnecting the control cableCAUTION!MATERIAL DAMAGE!Radiant heat and hot surfaces may damage the controller cable. Lay out the controller cable so it will not be damaged by the heat of downstreamunits (hot surfaces or radiant heat)!Fig. 4.6 – Connecting control cable METRO *C/J*[1] Control cable connectionFig. 4.7 – Connecting control cable METRO *P*[1] Control cable connectionThe electrical power is supplied from the controller via the controller cable (see figure 4.64.7).20 Edition: February 2006
Page 1 and 2: Hopper loaderMETRO 06-1 to 30-1Oper
Page 6 and 7: METRO 06-1 to 30-1Structure and fun
Page 8 and 9: METRO 06-1 to 30-1Operation 7Settin
Page 10 and 11: METRO 06-1 to 30-1Operation 7Operat
Page 12 and 13: 8 TroubleshootingTroubleshooting ME
Page 14 and 15: 9 Maintenance and repairBefore star
Page 16 and 17: 9 Maintenance and repairMaintenance
Page 18 and 19: 9 Maintenance and repairMaintenance
Page 20 and 21: 9 Maintenance and repairRepair work
Page 26 and 27: METRO 06-1 to 30-1Decommissioning a
Page 28 and 29: 11 OptionOption: Pneumatically actu
Page 34 and 35: METRO 06-1 to 30-1Option 11Implosio
Page 36 and 37: METRO 06-1 to 30-1Option 11Implosio
Page 38 and 39: METRO 06-1 to 30-1Option 11Marathon
Page 40 and 41: METRO 06-1 to 30-1Appendix 12METRO
Page 50 and 51: METRO 06-1 to 30-1Appendix 12Multif
Page 52 and 53: METRO 06-1 to 30-1Appendix 12Pneuma
Page 54 and 55:
ABCDE2A1+ZSWPE+ 24V M VACVPE 1 2 3G
Page 56:
AB1CF 2DEnderung Datum Name1DatumBe
show all

Operating Manual Hopper loader

Create successful ePaper yourself

Delete template?

Save as template?