User Manual DAP 26 - KME

DisplayK.M.E. DAP26 V0.1Preset ConfigurationChoose an option!A 4x20 back-lighted LCD display shows the navigation menu. You can set allsoftware parameters on the unit itself. Arrows in the lower right corner show thedirections to navigate to submenus. (see appendix ‘navigation structure’). Use thenavigation pad to move between the menus. Press the ‘OK’ button to select aparameter if you are asked by the unit.Navigation PadThe navigation pad is to be used for accessing and changing parameters on thedisplay of the hardware unit. Press the OK button if you are asked by the software.See also the appendix ‘menu structure’!Level meter 1-6Level correction 1-6Mute switch 1-6-6 dB +6MUTELIMIT+0dB-60-6 dB +6MUTEThe level correction pot adjusts the output level of the corresponding channel by +/- 6dB. This is done on digital signal level and independent from the gain correction inthe software plug-in.Pressing the mute switch mutes the corresponding output channel. The level meterstill displays the output level to avoid unintentional triggering of the switches.