SA03-01 (X Series) Installation Manual.pdf - Footprint Security

Step 5 – Capture and view a test imageStatus LED flashes orange for 2 seconds1 Press middle (blue) buttonTestimageTest images are stored on the memory card in a folder named DCIM and under thatare directories named xxxDIR00 where xxx is a number from 100 - 999. The folderwith the largest number contains the most recent images.MostrecentfolderTestimagesWith the test image(s) displayed in the Camera Setup Image Viewer, rereadChoosing A Camera Location (page 14) and ensure that the camera is installed inthe most ideal location.Step 6 - Arm the CameraThe camera operates like a home security system. It has to be armed by the userbefore the motion sensor can trigger any image captures. Refer to the followingsection ‘Camera Operation’ for information on how to arm and disarm the camerausing the remote control.SA03-01 (X SERIES) INSTALLATION MANUAL V1.0.1 (APRIL 2009) 13