Operating instructions - TRW Automotive Aftermarket

FastCheck
Close brakes
Select the 'Close Brakes' option from the ‘Replace Pads’ menu. The brake pistons
will now be moved to their reset position. Wait until the service tool displays the
‘Close Brakes Now Complete’ message before continuing.
Calibrate brakes
Select the 'Calibrate Brakes' option from the ‘Replace Pads’ menu. The brake
pistons will now be moved in and out to calibrate their position. Wait until the
service tool displays the ‘Calibrate Brakes Now Complete’ message before
continuing.
Brakes service sequence (only)
The EPB system must be released and deactivated. Ensure the ignition is ON before
following the sequence described below.
NOTE: If the sequence is not performed in the correct order the braking system may
not operate correctly.
Release brakes
Select the 'Release Brakes' option from the ‘Service Brakes’ menu. The brake
pistons will now be moved to their released position. Wait until the service tool
displays the ‘Release Brakes Now Complete’ message before continuing.
Service the brakes
The brakes can now be serviced following the manufacturer’s instructions.
Close brakes
Select the 'Close Brakes' option from the ‘Service Brakes’ menu. The brake pistons
will now be moved to their reset position. Wait until the service tool displays the
‘Close Brakes Now Complete’ message before continuing.
Calibrate brakes
Select the 'Calibrate Brakes' option from the ‘Service Brakes’ menu. The brake
pistons will now be moved in and out to calibrate their position. Wait until the
service tool displays the ‘Calibrate Brakes Now Complete’ message before
continuing.
97