Operating instructions - TRW Automotive Aftermarket

FastCheck
FastCheck Introduction
The 'FastCheck' functions allow the service tool to communicate with other system
control modules on the vehicle.
Connection to the specific system is via either the vehicle's EOBD (J1962)
diagnostic socket or by a system specific connector. Refer to the 'Vehicle
Application List' to determine the correct cable.
Brake
• ‘FastCheck ABS’ allows you to read and clear any fault codes stored by the
selected system.
• ‘FastCheck EPB’ (Electronic Parking Brake) allows you to read and clear any fault
codes stored by the selected system, and in addition can be used during brake
operation checks or brake pad replacement.
SRS
• ‘FastCheck Airbag’ allows you to read and clear any fault codes stored by the
selected system.
Climate
• ‘FastCheck Climate’ allows you to read and clear any fault codes stored by the
selected system.
EMS
• ‘FastCheck EMS’ allows you to read and clear fault codes stored by the selected
system. Additional functions may be available such as live data, actuator tests,
maintenance and injector reprogramming depending on the selected system.
SAS
• ‘FastCheck SAS’ (Steering Angle Sensor) allows you to read and clear any fault
codes stored by the selected system, and in addition can be used to calibrate the
steering angle sensor.
Service
• ‘FastCheck Service’ allows you to reset, dependant upon vehicle, the oil service
interval indicator, service and inspection warning lights.
TPMS
• The ‘TPMS’ (Tyre Pressure Monitoring System) function can be used to
re-program TPMS tyre valves to the control module.
18