Operating instructions - TRW Automotive Aftermarket
Operating instructions - TRW Automotive Aftermarket
Operating instructions - TRW Automotive Aftermarket
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
General information Cleaning<br />
General information<br />
To maintain the condition and serviceability of the service tool, it is advisable to follow<br />
the cleaning procedures below:<br />
WARNING: Do not use solvents such as petroleum based cleaning agents, acetone,<br />
petrol, trichlorethylene etc. These types of harsh solvent may seriously<br />
damage the plastic casing. Do not even spray or pour this type of cleaner onto<br />
a cleaning cloth.<br />
WARNING: The service tool is not waterproof. Always dry the unit thoroughly<br />
after cleaning or if it has been subject to accidental spillage.<br />
The manufacturer recommends that you periodically inspect and clean the following<br />
parts of the service tool:<br />
• The case<br />
• The display screen<br />
• The keypad<br />
• Adaptor cables and connectors<br />
To clean the service tool, or any of its cables or connectors, apply a mild detergent<br />
solution to a soft clean cloth that has been suitably dampened.<br />
WARNING: Before cleaning, disconnect the service tool from the vehicle.<br />
Display screen<br />
During normal everyday use, the screen may become dusty or covered in grime. To<br />
clean the screen, always use a soft, clean, antistatic cloth. If any stubborn stains or<br />
marks remain, use a non-abrasive glass cleaner applied to a soft, clean cloth. Gently<br />
wipe the cloth across the display until the marks have been removed.<br />
Software updates<br />
For the latest information on software updates go to:<br />
www.trwaftermarket.com/easycheck<br />
153